D-Link DCS-G900 manual Advanced Wireless Wireless Interface, Connection Mode

Page 21

DCS-G900 User’s Manual	DCS-G900 Conﬁguration

Advanced > Wireless

Wireless Interface

Connection Mode:

SSID:

Site Survey:

Wireless Channel:

Infrastructure is a wireless connection using an access point as a transmission point of all wireless devices. Ad-Hocis a wireless connection used without an access point. This basically connects the PC directly to the DCS-G900. This is done using the on-board wireless adapter on the DCS-G900 connected to a wireless adapter on the PC.

Service Set Identiﬁer is an identiﬁer for the wireless network name that other devices can recognize.

This page will allow you to select a wireless network that the DCS-G900 was able to detect upon booting up (see page 14).

The default wireless channel setting is channel 6. Select the channel that is the same as the other wireless devices on your network. For the U.S. region, there are up to 11 channels and anyone of them can be selected to achieve the best signal.

D-Link Systems, Inc.

21

Image 21

Contents Page Table of Contents DCS-G900 User’s Manual Introduction System Requirements Package ContentsFeatures and Beneﬁts Wireless Antenna Power LED Camera Lens Hardware OverviewCamera Stand Connector Wireless AntennaGetting Started Attach the External Power Supply Hardware InstallationAttach the Antenna Attach the Swivel StandSecurity DCS-G900 Setup Wizard DCS-G900 User’s Manual DCS-G900 User’s Manual Enter the Encryption Mode, Key Format, Your setup is now complete DCS-G900 Conﬁguration ActiveX Java SetupHome Home ActiveXHome Java Home SetupAdmin Advanced System System SettingConﬁrm Password LED ControlAdvanced Video Video Setting Advanced Wireless Wireless Interface Connection ModeSite Survey Wireless Channel Advanced Wireless Advanced SettingEncryption Preamble Advanced Wireless Site SurveyAdvanced Network UPnP IP Address Mode DNS IP Address Dynamic DNSProvider MailAccess Control Advanced User User Access ControlDeﬁne Users Add User Delete User User ListSet Manually Advanced Time Date & Time SettingProtocol Date Time Synchronized With ComputerAdvanced Upload FTP Server User Name Password Directory Path Passive ModeAlways Schedule Video Frequency Base File Name Advanced UploadUser Name Password Advanced E-mailSmtp Server Address Sender e-mail Interval Test E-mail Account Tools TestTools Reset Firmware UpdateTools Firmware Restore Device Conﬁguration From File Tools BackupStatus Video Status SystemStatus Network Status WirelessStatus User Help Open the Http Port Router Setup and Installation Select TCP under Protocol Type Open Virtual Server Ports To Enable Remote Image ViewingViewing Your Camera Click Install Software Click Install IPView SE IPView SE Application InstallationClick Next Click Yes Link Systems, Inc DCS-G900 User’s Manual IPView SE IPView SE Icon Description Add a New Camera How to Delete a Camera How to Change the IP Address How to Format the Camera View View/List How to Rotate the Video ViewZoom Color SettingWake Up Control Panel Always on TopHow to take a Snap-Shot with the Camera How to Start RecordingHow to Stop Recording Motion Setting Camera SettingsConﬁgure Camera from Web Click the Conﬁgure Camera from Web buttonSchedule Recording Manual RecordingScan Motion RecordingPlay Camera’s Extra InformationProﬁle System ConﬁgureLog Storage Storage List Recycle Player Setup Proxy Server About Uninstall IPView SE What is an Internet Camera? Frequently Asked Questions Internet Camera FeaturesWhat network cabling is required for the Internet Camera? Why does the Power LED not light up constantly? Internet Camera InstallationNoisy images occur. How can I solve the problem? How to Ping Your IP Address Network Technical SpeciﬁcationsPower Consumption Environmental speciﬁcation Appendix Wireless Installation ConsiderationsNetworking GlossaryGlossary Technical Support Technical SupportWarranty Warranty DCS-G900 User’s Manual Registration