D-Link DCS-G900 manual Advanced Upload FTP Server, User Name Password Directory Path Passive Mode

Page 28

DCS-G900 User’s Manual

DCS-G900 Configuration

 

 

Advanced > Upload

FTP Server

Host Address: Port Number:

User Name:

Password:

Directory Path:

Passive Mode:

This is the IP address of the FTP server that you will be connecting to.

Default is port 21. If changed, external FTP client program must change the server connection port accordingly.

Specifies the user name to access the external FTP server. If you are to upload snapshots to an FTP server you will need to fill in the Domain name or IP address of your external FTP server. The following user settings must be correctly configured for remote access.

Specifies the password to access the external FTP server.

Specifies the destination folder in the external FTP server.

Enabling passive mode will allow access to an external FTP server if your camera is behind a router protected by a firewall.

D-Link Systems, Inc.

28

Image 28
Contents Page Table of Contents DCS-G900 User’s Manual Introduction Package Contents System RequirementsFeatures and Benefits Hardware Overview Wireless Antenna Power LED Camera LensCamera Stand Wireless Antenna ConnectorGetting Started Hardware Installation Attach the External Power SupplyAttach the Antenna Attach the Swivel StandSecurity DCS-G900 Setup Wizard DCS-G900 User’s Manual DCS-G900 User’s Manual Enter the Encryption Mode, Key Format, Your setup is now complete ActiveX Java Setup DCS-G900 ConfigurationHome Home ActiveXHome Setup Home JavaAdvanced System System Setting AdminConfirm Password LED ControlAdvanced Video Video Setting Connection Mode Advanced Wireless Wireless InterfaceSite Survey Wireless Channel Advanced Setting Advanced WirelessEncryption Advanced Wireless Site Survey PreambleAdvanced Network IP Address Mode DNS IP Address Dynamic DNS UPnPProvider MailAdvanced User User Access Control Access ControlDefine Users Add User Delete User User ListAdvanced Time Date & Time Setting Set ManuallyProtocol Date Time Synchronized With ComputerUser Name Password Directory Path Passive Mode Advanced Upload FTP ServerAdvanced Upload Always Schedule Video Frequency Base File NameAdvanced E-mail User Name PasswordSmtp Server Address Sender e-mail Interval Tools Test Test E-mail AccountFirmware Update Tools ResetTools Firmware Tools Backup Restore Device Configuration From FileStatus System Status VideoStatus Wireless Status NetworkStatus User Help Open the Http Port Router Setup and Installation Open Virtual Server Ports To Enable Remote Image Viewing Select TCP under Protocol TypeViewing Your Camera IPView SE Application Installation Click Install Software Click Install IPView SEClick Next Click Yes Link Systems, Inc DCS-G900 User’s Manual IPView SE IPView SE Icon Description Add a New Camera How to Delete a Camera How to Change the IP Address How to Format the Camera View How to Rotate the Video View View/ListColor Setting ZoomWake Up Control Panel Always on TopHow to Start Recording How to take a Snap-Shot with the CameraHow to Stop Recording Camera Settings Motion SettingConfigure Camera from Web Click the Configure Camera from Web buttonManual Recording Schedule RecordingMotion Recording ScanCamera’s Extra Information PlaySystem Configure ProfileLog Storage Storage List Recycle Player Setup Proxy Server About Uninstall IPView SE Frequently Asked Questions Internet Camera Features What is an Internet Camera?What network cabling is required for the Internet Camera? Internet Camera Installation Why does the Power LED not light up constantly?Noisy images occur. How can I solve the problem? How to Ping Your IP Address Technical Specifications NetworkPower Consumption Environmental specification Wireless Installation Considerations AppendixGlossary NetworkingGlossary Technical Support Technical SupportWarranty Warranty DCS-G900 User’s Manual Registration