| IPView SE |
|
|
Add a New Camera
To add a new camera select the Camera button from the IPView SE. Make sure that the green lights are on when clicking the camera button.
A green light under the camera button means that there is already a camera connected.
Select the camera you would like to connect to and click Add A Camera. If the camera is not listed in this list, click the Input IP Address button. Enter the IP Address of the camera in the specified field and click Add. If the IP Address is entered incorrectly or if you have a bad net- work connection, a dialog box will appear to notify you of the error. To add cameras in IPView SE, check that you have your network configured correctly. To add a remote camera, you need to have Internet access.
If you are unsure of the IP Address of the camera, you can click on Search to search for all available cameras that are installed on your local area network.
Note: Only cameras on your local area network can be located using Search in IPView SE. If you want to add a camera via the Internet, you must enter in a public IP Address. Please note that if your camera is behind a router, you will need to enter your router’s WAN IP followed by a colon, then the port number that is assigned to your camera. As in example 10.10.10.80:800, where 10.10.10.80 is your router’s WAN IP and :800 is the port that your camera is using.
48 |