D-Link DCS-900W manual Camera Name, Location, IP Assignment, Manually Assign

DCS-900W Configuration (continued)

Advanced > System

Camera Name:

This field is used for entering a descriptive name for the camera. The default setting for the Camera Name is CS-xxxxxx, where xxxxxx are the last six digits of the MAC Address. The maximum length is 32 characters (Printable ASCII).

Location:

This field is used for entering a descriptive name for the location used by the DCS- 900W.

IP Assignment:

Important Information

Access to the Internet Camera is gained by assigning a proper IP Ad- dress. Please make sure to use a vacant IP address when you assign the IP Address for the Internet Camera. This will prevent IP Address conflicts.

There are two options to select from the IP Assignment, either Manually Assign or Assign Automatically Using.

Manually Assign

You can click Manually Assign and directly enter a valid IP Address for your camera. Remember that your camera’s IP Address must correspond to your network settings if you wish to change it here.

The default settings are as follows:

!Default IP – 192.168.0.20

!Subnet Mask – 255.255.255.0

!Default Gateway – 0.0.0.0

20