D-Link DCS-900W manual Tools Default, Status, Factory Reset

Page 38

DCS-900W Configuration (continued)

Tools > Default

The Default tab contains commands for restarting the DCS-900W.

Click on Tools, then the Default tab in the left hand panel and the Tools screen will appear as illustrated below

Factory Reset:

A factory reset restarts the DCS-900W and returns all settings to their default values. The Factory Reset will promt you with a “Do you really want to factory reset this device?” message and a YES button. If you do not want to carry out a factory reset command, exit the panel without clicking YES, otherwise click on the “YES” icon and factory reset will be initiated.

Warning

All settings must be reconfigured after a Factory Reset!

Status

The Status menu displays information about your DCS-900W.

Click on Status and the Information screen will appear as illustrated below:

The Information table provides detailed information about the DCS-900W such as the Model Name, Firmware Version, Mac Address, and IP Address.

38

Image 38

Contents LinkSecuriCam VersionContents Package Contents Introduction Features & Benefits802.11b Wireless or Ethernet/Fast Ethernet Support Simple to UseBroad Range of Applications Web ConfigurationRemote Monitoring Utility Reset Button EthernetCable ConnectorDC Power Connector ConnectionsBottom Panel view Power LED LedsHardware Installation Attach the AntennaSecurity Using the Setup Wizard Using the Setup Wizard Click Wizard to begin Using the Setup Wizard Click Link Click Yes DCS-900W Configuration Web ConfigurationTools DCS-900W ConfigurationAdvanced Status HelpAdvanced System IP Assignment Camera NameLocation Manually AssignAssign Automatically Using DNS IP Address Dynamic DNS Wireless Interface Ascii input formatLED Control HEX input formatLoading ActiveX From Open Second PortApply/Cancel Single Camera Installation Installing the DCS-900W Behind a RouterIdentify Your Camera on the Network Assign a Local IP Address for Your CameraOpen Second Port For Installing Multiple CamerasAssigning and opening second port in the DCS-900W Router SET-UP and Installation Open Virtual Server Ports To Enable Remote Image Viewing Assigning and Opening Virtual Server PortsViewing Your Camera Advanced Video Light Frequency Tools AdminPassword with a User Name User PasswordAdd User Important InformationIP Address Tools TimeDateTime Protocol TimeZoneStatus Tools DefaultFactory Reset Completing Your Camera Configuration ActiveXJava IPView Lite Application Installation IPView Lite Application Installation Click Continue Anyway IPViewLite IPView Lite Application Installation IPView Lite IPView LiteIPView Lite How to Change the PasswordChange Password How to Change the IP Address Changing the IP AddressIPView Lite How to Add a Camera IPView Lite IPView Lite- Getting Started How to Add/Delete a CameraHow to Delete a Camera How to Format the Camera view How to Rotate the Video view How to take a Snap-Shot with the CameraHow to Start Recording How to Stop RecordingCamera Property Settings General GeneralCamera Property Settings IP Assignment IP AssignmentCamera Property Settings DNS DNSCamera Property Settings Wireless WirelessImage Camera Property Settings Misc, ImageMisc Camera Property Settings Users UsersCamera Property Settings Date/Time Date/TimeCamera Property Settings Information InformationTools Camera Property Settings ToolsUpgrade Firmware Manual Recording Camera Property Settings RecordingRecording Options Scheduled Recording IPView Lite Getting Started Motion Trigger RecordingFile Options File PathMenu Bar Menu Bar View List View Enable Function Menu Bar Camera, ToolsAccount System ConfigurationMenu Bar Tools IPView Lite Networking Configuration Menu Bar AboutIPView Lite Icon Description Context Sensitive Menu Uninstall IPView Lite Application Uninstall IPView Application What algorithm is used to compress the digital image? Internet Camera FeaturesWhat is a Wireless Internet Camera? Can I capture still images from the Internet Camera?Internet Camera Installation Frequently Asked QuestionsTroubleshooting Cannot access the Internet Camera from a web browserWhy does the Power LED not light up constantly? Why does the LAN LED not light up properly?Noisy images occur. How can I solve the problem? Appendix B There are no images available through the web browser?How to Ping your IP Address Time Zone Table Time Zone Table Configuration Xplug Control InstallationInstallation Installation of the X-Plug to a Local PC Click Next Click Yes Adjusting the Camera Focus Camera LensAdjusting the Camera Focus Image Video Setting Technical SpecificationsVideo specification System HardwareWeb Configuration Requirements Technical SpecificationsEMI & Safety Communication SupportTech Support for customers within Canada Contacting Technical SupportTech Support for customers within the United States Warranty and Registration Warranty and Registration Warranty and Registration