Connections
Video output connection
Connect the video output of the camera to the video input of a monitor or other equipment. When using a "loop through" connection of two or more monitors, set the 75Ω switch of only the final monitor to on. Determine the type of cable according to the distance of the connected equipment. The maximum cable lengths indicated below are recommended for avoiding appreciable picture degradation.
: 150 meters | ||
: 200 m | ||
: | 300 m | |
: | 400 m | |
External sync input connection
The camera is automatically set for external sync by connecting a black burst (BB) or composite video (VBS) signal to the Genlock input terminals. When using a "loop through" sync connection to two or more cameras, set the 75Ω switch of only the final camera to on.
6