Nikon 55, 3699, 3700 instruction manual Load Film--~, Pull film leader across to red index mark

load Film--~--------\

Turn the power switch on and load OX-coded fi lm. With OX-coded film, film speed will be set automatically (ISO 25-5000). When the camera back is

closed, the film automatically advances and the number of available

.....................................................exposures is displayed in the LCD panel

1 Turn the power switch on, open the camera back by sliding the camera back lock release lever and load film .

•Film cartridge can be loaded smoothly if inserted from the bottom.

•Make sure to insert the film cartridge all the way in.

2 Pull film leader across to red index mark.

•Make sure to align the film leader to the red index mark; if the film leader is not properly aligned to the index mark (short of or beyond the mark), film may not be loaded properly.

•Hold the film cartridge and ensure film is properly positioned with no slack.

NOTE: Loading/removing film

Shutter curtains are very thin . Do not touch the shutter curtains with your finger or the film leader.