• Programmed Flash mode
When the optional Speed light is attached with the flash mode set to A (Non- TTL Auto Flash) and the exposure mode dial is set to 8, Vari- Program, P or S, Programmed Flash is performed (camera aperture is automatically controlled according to the film speed).
•When an optional Speedlight is attached and the camera power switch is turned on, the camera automatically selects the aperture according to the fi lm speed. Set the aperture on the Speedlight according to the aperture indicated on the camera.
ISO film speed
Aperture
*One EV change in the film speed changes aperture by one EV. If the film speed of the ~
film in use is an intermediate value of the film speed indicated in the table, the | &I |
aperture changes accordingly. If the controlled aperture is darker than maximum | ~~ |
aperture, maximum aperture of the attached lens is selected. | iii |
•See
•Available flash sync mode with optional Speedlight
Exposure |
|
| ||||
Reduction with | Slow Sync | Flash Cancel | ||||
mode | Sync | Reduction | ||||
Slow Sync |
|
| ||||
|
|
|
|
|
8 | 0 | 0 | - | - | - |
~ | 0 | 0 | - | - | - |
r:J* | 0 | 0 | - | - | - |
~ | 0 | 0 | - | - | - |
~Q* | 0 | 0 | - | - | - |
~ | 0 | 0 | - | - | - |
p | 0 | 0 | - | - | - |
S | 0 | 0 | - | - | - |
A | 0 | 0 | 0 | 0 | - |
M | 0 | 0 | - | - | - |
•
95