![](/images/new-backgrounds/1139198/139198163x1.webp)
Using Built-In Speedlight-continued
3 Confirm ~ appears in the viewfinder, make sure the subject is within the flash shooting distance range and shoot.
•The shutter cannot be released unless ~ appears without blinking in the viewfinder.
•~ in the viewfinder blinks approx. 3 sec. after full flash output. This may indicate underexposure has occurred . Check the focus distance, aperture or flash shooting distance range and shoot again.
•When the subject is dark, the
•Available shutter speed and aperture in each exposure mode
Exposure mode | Available shutter speed | Available aperture | Page |
~ |
|
| 28 |
:2 |
|
| r |
Automatically set to 1/90 sec. |
| 37 | |
~ |
|
| r |
| Automatically set | 38 | |
~ | Automatically set to | r | |
| 39 | ||
P |
|
| r |
Automatically set to 1/90 sec.*' |
| 54 | |
S |
| r | |
| 56 | ||
A | Automatically set to 1/90 sec:' |
| 58 |
M | Desired setting*3 | r | |
| 60 |
*1 Shutter speed is prolonged up to 30 sec. with Slow Sync and
*2 Shutter speed shifts automatically to 1/90 sec. when the shutter speed is set to faster than 1/90 sec. and the
*3 Flash shooting distance range depends on the ISO speed of the film in use and aperture setting. In A or M exposure mode, set the aperture according to the flash shooting distance range table on the next page.
82