Voice Gateway with Router

Interactive Voice Response Menu

Action

Command

Choices

Description

 

(press these

 

 

 

keys on the

 

 

 

telephone)

 

 

 

 

 

 

Set the Mode

201

Press 0 to select the

If the Voice Gateway acts as the router for

 

 

router/NAT mode.

your network, use the router/NAT mode.

 

 

Press 1 to select the

 

 

 

bridge/switch mode.

If your network already has a router, use the

 

 

 

bridge/switch mode.

 

 

 

 

Enable/Disable WAN

7932

Press 1 to enable.

Use this setting to enable or disable WAN

Access to the

 

Press 0 to disable.

access to the Web-based Utility. (This Utility

Web-based Utility

 

 

lets you configure the Voice Gateway.)

 

 

 

 

Manual Reboot

732668

 

After you hear, “Option successful,” hang up

 

 

 

the phone. The Voice Gateway will

 

 

 

automatically reboot.

 

 

 

 

Factory Reset

73738

Press 1 to confirm.

If necessary, enter the password. The Voice

 

 

Press * (star) to cancel.

Gateway will request confirmation; enter 1 to

 

 

 

confirm. You will hear, “Option successful.”

 

 

 

Hang up the phone. The Voice Gateway will

 

 

 

reboot, and all settings will be reset to their

 

 

 

factory default settings.

 

 

 

 

NOTE: This feature may be protected by a password available only from your ITSP.

If you need to enter a password, refer to the following section, “Entering a Password.”

18

Chapter 5: Using the Interactive Voice Response Menu

 

Using the Interactive Voice Response Menu

Page 26
Image 26
Cisco Systems SPA3102 manual Set the Mode 201 Press 0 to select