Voice Gateway with Router
The Front Panel
The Voice Gateway’s LEDs, which inform you about network activities, are located on the front panel.
| Figure |
|
Power | Green. The Power LED lights up when the Voice Gateway is powered on and connected to |
|
| the Internet. It flashes when the Voice Gateway is not connected to the Internet. The LED |
|
| also flashes when the Voice Gateway is booting up or upgrading its firmware. |
|
ETHERNET | Green. The ETHERNET LED lights up when there is an active connection through the |
|
| ETHERNET port. If the LED is flashing, then there is traffic moving through that port. |
|
PHONE | Green. The PHONE LED is solidly lit when a telephone or fax machine has an active or |
|
| registered connection to your Internet Telephony Service Provider (ITSP) through the PHONE |
|
| port. It flashes when the phone is being used or is off the hook. |
|
LINE | Green. The LINE LED lights up when the a telephone or fax machine has an active |
|
NOTE: The LINE port will be | ||
| connection to traditional phone service through the LINE port. | active only if you have |
|
| traditional phone service. |
| Proceed to “Chapter 4: Getting Started.” |
8 | Chapter 3: Getting to Know the Voice Gateway |
| The Front Panel |
