Voice Gateway with Router

Chapter 3: Getting to Know the Voice Gateway

The Back Panel

The Voice Gateway’s ports are located on the back panel.

 

Figure 3-1: Back Panel

LINE

Use this port to connect the Voice Gateway to your standard telephone wall jack.

PHONE

Use this port to connect an analog phone (or fax machine) with an RJ-11 telephone cable.

ETHERNET

The ETHERNET port connects to a network device, such as a PC or a switch, with an

 

Ethernet network cable.

INTERNET

The INTERNET port connects to your cable or DSL modem.

Power

The Power port is where you will connect the power adapter.

NOTE: The LINE port will be active only if you have traditional phone service.

Chapter 3: Getting to Know the Voice Gateway

7

The Back Panel

Page 15
Image 15
Cisco Systems SPA3102 manual Getting to Know the Voice Gateway, Back Panel