Voice Gateway with Router

Voice

Info. This screen displays voice-related status information about the Voice Gateway.

System. Use this screen to configure the user password.

User 1. Use this screen to configure call forward, speed dial, supplementary service, and ring settings for the Internet phone line.

PSTN User. PSTN stands for Public Switched Telephone Network, which is the network that traditional phone service uses. Use this screen to configure call forward, speed dial, and ring settings for the PSTN line.

How to Access the Web-based Utility

To access the Web-based Utility of the Voice Gateway, launch the web browser on the PC connected to the Voice Gateway’s Ethernet port. If the Voice Gateway uses its default address, then enter 192.168.0.1 in the Address field. If you have assigned a static IP address to the Voice Gateway, then enter <IP address of the Voice Gateway> in the Address field. Press the Enter key.

If your Internet Telephony Service Provider (ITSP) did not supply a password, you will not see a login screen. If your ITSP supplied a password, then you will see a login screen. In the User Name field, enter user, the default user name for user access. (This cannot be changed.) Then enter the password supplied by your ITSP.

Two views of the Web-based Utility are available. Click basic to view basic settings, or click advanced to view advanced settings.

When you have finished making changes on a screen, click the Submit All Changes button to save the changes, or click the Undo All Changes button to undo your changes. When changes are saved, the Voice Gateway may reboot.

22

Figure 6-1: Login Screen

Chapter 6: Using the Web-based Utility How to Access the Web-based Utility

Page 30
Image 30
Cisco Systems SPA3102 manual How to Access the Web-based Utility, Voice