8 Pressing the shutter release button slightly
Check the flash shooting distance range and be sure the
-If the electronic analog display appears, the operation is controlled by center· weighted TTL flash . In this case, the main
subject is taken at the correct exposure, but if the electronic analog display is on
the plus side, the background exposure will be too bright (over·exposed), or if it is on the minus side, the background expo· sure will be too dark (under·exposed). If no special background effects are needed, the photograph can be taken as is with correct exposure.
For matrix balanced fill·flash operation , reset the aperture dial on the camera so that the overexposure or underexposure indicator goes out. Using the exposure calculation chart (see page 41), be sure the aperture value set is within the shooting distance range.
Shooting
9 If both viewfinder
I..~~~~~~h~~~:~
.:. | ~IGFS.~ | _ |
I • A 1m |
|
27