Nikon 58-104 manual Possible Shooting Modes wHh the S8-104 and Nikonos

Possible Shooting Modes wHh the S8-104 and Nikonos V

I	Possible	58·104 settings			Nikonos V settings
		Standby	Function	Flash	Shutter dial	Aperture
	shooting
		switch	selector	mode	(*3)	value (*4)
	modes
		(*1)	(*2)	selector
	Center·weighted				"A".	Desired
	TTL flash (*5)	ON	Standard	TTL	1/1000-1/30	aperture
					sec.	value
	Manual (*6)			MFull	"A".	Desired
		ON	Standard	M1/4	1/1000-1/30	aperture
				M1/16	sec., " M90, "	value
					" S"

*1 In manual shooting mode, turn OFF the standby switch when the shutter speed dial is set to "M90" or "8."

*2 Set the function selector to "Standard" for operations other than Camera Slave and Flash Slave.

*31f the shutter speed is set to "A" or 1/1000-1/125second, it is automatically controlled at 1/90 second. It the shutter speed dial is set to 1/60 second or slower, the shutter speed is automatically controlled at the specified shutter speed.

*41f the shutter speed dial is set to "A," select the aperture value so that the shutter speed indicators for "125" and "60" blink, or "60" or "30" blinks.

If you set the shutter speed dial to 1/60 second or 1/30 second select aperture value so that the specified shutter speed indicator blinks, or that a shutter speed slower than the one specified blinks.

*5 It the usable film speed range in TTL flash mode exceeds ISO 400, the sync cord is not correctly connected, or the shutter speed dial is set to "M90" or "S", the ready-light will blink to alert you.

*6When setting the flash mode selector in manual shooting mode, select a guide number (MFull, M1/4, or M1/16) so that the actual shooting distance corresponds to that of the exposure calculation chart (see page 41).

31