Yamaha RX-V650 owner manual Specifications

Page 84

SPECIFICATIONS

AUDIO SECTION

•Minimum RMS Output Power for Front, Center, Surround, Surround back

20 Hz to 20 kHz, 0.06% THD, 8 Ω

95 W

• Maximum Power (EIAJ)

 

 

[China, Korea and General models]

 

 

1 kHz, 10% THD, 8 Ω

135 W

• Dynamic Power (IHF)

 

 

8/6/4/2 Ω

130/165/195/240 W

• DIN Standard Output Power [U.K., Europe and Asia models]

1 kHz, 0.7% THD, 4 Ω

145 W

• IEC Output Power [U.K., Europe and Asia models]

 

1 kHz, 0.06% THD, 8 Ω

105 W

• Damping Factor (IHF)

 

 

20 Hz to 20 kHz, 8 Ω

100 or more

• Frequency Response

 

 

CD terminal to Front L/R

10 Hz to 100 kHz, –3 dB

• Total Harmonic Distortion

 

 

CD, etc. to Front L/R (20 Hz to 20 kHz, 50 W, 8 Ω)

.......... 0.06%

• Signal to Noise Ratio (IHF-A Network)

 

 

CD (250 mV) to Front L/R, Effect Off

100 dB

• Residual Noise (IHF-A Network)

 

 

Front L/R

150 µV or less

• Channel Separation (1 kHz/10 kHz)

 

 

CD (5.1 kΩ terminated) to Front L/R

60 dB/45 dB

• Tone Control (Front L/R)

 

 

BASS Boost/Cut

±6 dB/50 Hz

BASS Turnover Frequency

350 Hz

TREBLE Boost/Cut

±6 dB/20 kHz

TREBLE Turnover Frequency

3.5 kHz

• Phones Output

150 mV/100 Ω

• Input Sensitivity/Input.................................................................Impedance

200 mV/47 kΩ

CD, etc.

MULTI CH INPUT

200 mV/47 kΩ

• Output Level/Output.............................................................Impedance

200 mV/1.2 kΩ

REC OUT

PRE OUT

2 V/1.2 kΩ

SUB WOOFER

4 V/1.7 kΩ

VIDEO SECTION

• Video Signal Type

PAL/NTSC

• Signal to Noise Ratio

50 dB

• Frequency Response (MONITOR OUT)

 

Composite, S-Video

5 Hz to 10 MHz, –3 dB

Component

5 Hz to 60 MHz, –3 dB

FM SECTION

• Tuning Range

 

[U.S.A. and Canada models]

.......................... 87.5 to 107.9 MHz

[Asia and General model]

87.5/87.50 to 108.0/108.00 MHz

[Other models]

87.50 to 108.00 MHz

• Usable Sensitivity (IHF)

1.0 µV (11.2 dBf)

• Signal to Noise Ratio (IHF)

 

Mono/Stereo

76 dB/70 dB

• Harmonic Distortion (1 kHz)

 

Mono/Stereo

0.2%/0.3%

• Stereo Separation (1 kHz)

42 dB

• Frequency Response

20 Hz to 15 kHz, +0.5, –2 dB

AM SECTION

• Tuning Range

 

[U.S.A. and Canada models]

.............................. 530 to 1710 kHz

[Asia and General models]

530/531 to 1710/1611 kHz

[Other models]

531 to 1611 kHz

• Usable Sensitivity

300 µV/m

GENERAL

• Power Supply

 

 

[U.S.A. and Canada models]

............................. AC 120 V, 60 Hz

[Australia model]

AC 240 V, 50 Hz

[China model]

AC 220 V, 50 Hz

[Korea model]

AC 220 V, 60 Hz

[U.K. and Europe models]

AC 230 V, 50 Hz

[General model]

AC 110/120/220/230-240 V, 50/60 Hz

[Asia model]

AC 220/230-240 V, 50/60 Hz

• Power Consumption

 

 

[U.S.A. and Canada models]

................................. 400 W/500 VA

[Other models]

440 W

• Standby Power Consumption

.................................................

0.1 W

• AC Outlets

 

 

[U.S.A., Europe and Canada models]

 

 

..........................................................

2 (Total 100 W maximum)

[U.K. and Australia models]

1 (Total 100

W maximum)

[Asia, China and General models]

2 (Total 50

W maximum)

• Dimension (W x H x D)

435 x 171 x 420 mm

• Weight

12.5 kg

82

Page 83 Page 85
Image 84
Page 83 Page 85
Contents RX-V650 For U.K. customers Special Instructions for U.K. ModelContents Features Built-in 7-channel power amplifierSound field features Other featuresSupplied accessories Installing batteries in the remote controlGetting Started Please check that you received all of the following partsControls and Functions Front panelEurope models only Remote control Using the remote control Handling the remote controlFront panel display 96/24 indicator LFE indicatorInput channel indicators Presence and surround back speaker indicatorsRear panel AC OutletsVoltage Selector Speaker Setup Speaker placementConnecting to Presence speaker terminals Speaker connectionsBanana plug connections 10 mmSubwoofer System Presence speakers Right LeftRight Left Front CenterFront terminals Center terminalsSurround terminals SUB Woofer jackConnections Cable indicationsAnalog jacks Digital jacksConnecting video components Connections for DVD playbackDVD player Video MonitorConnecting to the Multi CH Input jacks For 6-channel inputConnections for other video components Video AUX jacks on the front panelUse these jacks to connect any video source, such as a Connecting audio components Connections for audio componentsCD player MD recorder or Tape deckConnecting to an external amplifier Connecting the antennas Connecting the AM loop antennaFrequency Step switch Asia and General models only 75-ohm/300-ohm antenna adapterConnecting the AC power cord Memory back-upImpedance Selector switch Impedance Selector switchTurning on the power Turn on the video monitor connected to this unitFront panel Auto Setup Optimizer microphone setupIntroduction Optimizer microphone positionStarting the setup ResultwiringAutomenu Error Error E-5If an error screen appears ResultexitWhen you are finished, press Select Resultwiring screen appearsIf a warning screen appears Press u / d to select Result LIST, then press SelectTroubleshooting for auto setup procedure Before auto setupErrors during auto setup Adjust the volume to the desired output level PlaybackBasic operations Select the input sourceTo listen with headphones Silent Cinema To adjust the toneSelect a sound field program if desired To mute the soundSelecting sound field programs Multi CH InputSelecting Multi CH Input Playing video sources BackgroundRemote control operation Enjoying multi-channel softwareAuto Auto Decoders select with jPress q/DTS on the remote control to select the decoder Enjoying 2-channel softwarePRO Logic SUR. Standard PRO Logic SUR. EnhancedTo cancel, press Pure Direct again Listening to high fidelity stereo soundNight listening modes Press Pure Direct to activate pure directListening to unprocessed input signals Selecting input modesStraight Downmixing to 2 channelsInformation about the input signal Displaying information about the inputSource Press u / d to display the followingTuning Automatic and manual tuningAutomatic tuning Presetting stations Manual tuningAutomatically presetting FM stations Press FM/AM to select the FM bandManually presetting stations Automatic preset tuning optionsSelecting preset stations When performing this operation with the remoteControl, first press Tuner to set the remote to Repeat steps 1 to 5 to store other stationsSee Selecting preset stations Press and hold PRESET/TUNING Edit for more than 3 secondsReceiving RDS stations Changing the RDS mode To cancel this function Press PTY Seek Mode to set this unitPTY Seek mode PTY Seek functionEON function Special considerations when recording DTS software RecordingSound Field Program Descriptions For movie/video sourcesDolby Digital SUR. Standard Dolby DigitalSUR. Enhanced SUR. StandardPRO Logic SUR. Standard PRO LogicFor music sources Concert HallJazz Club Rock ConcertSelecting the OSD mode Using the sleep timer Setting the sleep timerAdvanced Operations P08 Movie TheaterCanceling the sleep timer Press j / i to adjust the speaker output levelPress Select when you have completed your adjustment Sleep OFFUsing the test tone Outputting the test tone from the Presence speakersPress AMP Press Test SET Menu Sound MenuInput Menu Option MenuUsing SET Menu Press u / d to select Manual SetupPress Select to enter Manual Setup To exit, press SET Menu when finishedSound Menu 1/2 Center SPFront SP Surr L/R SPSurr B L/R SP Presence SPLFE/BASS OUT Cross Over02ASUBWOOFER Phase CSP DistanceSpeaker distance CSP Distance Dcenter GEQ Elfe LevelFdynamic Range Gaudio SETHPR/SB Select Input MenuCMPNT-V Input Optical OUTBinput Mode CoaxialOption MENU1/2 Adisplay SETBmemory Guard CPARAM. INIDzone SET Parameter initialization CPARAM. INIRemote Control Features Control areaControlling this unit Controlling other componentsSetting manufacturer codes Press Code SET using a ballpoint pen or similar objectTransmit indicator on the remote control flashes twice Input area Category ManufacturerControlling other components VCRClearing setup manufacturer codes Clearing a setup manufacturer code for component controlWhat is a sound field Changing parameter settings Editing Sound Field ParametersElements of a sound field Resetting parameters to the factory presets To reset a certain parameterTo reset all parameters Press u / d to select the parametersINIT. DLY Initial delay Sound Field Parameter DescriptionsRoom SIZE/P. Room Size Room size INIT. DLY Surround initial delay SB INIT. DLY Surround back initial delayRoom Size Surround room size Liveness Surround livenessREV.DELAY Reverberation delay REV.TIME Reverberation timeREV. Level Reverberation level DIALG.LIFT Dialog lift For 7ch StereoCT Width Center width For DTS Neo6 Music Image Center imageTroubleshooting GeneralSound suddenly Goes offOnly the speaker on One side can beOr DTS indicator on Volume levelDolby Digital or DTS Sources cannot beTuner Remote control Does not work norFunction properly Resetting the Factory Presets Be sure this unit is in standby modeFactory Preset appears in the front panel display Press Straight Effect to select the desired settingGlossary Audio formatsSound field programs Audio informationLFE 0.1 channel PCM Linear PCMVideo signal information Component video signalComposite video signal Video signalSpecifications Citizen Korting Satellite Tuner VCRCable TV DVD Recorder LD PlayerCD Player DVD PlayerCD Recorder MD RecorderTape Deck WD06180

RX-V650 specifications

The Yamaha RX-V650 is a dynamic and versatile home theater receiver that caters to audiophiles and casual listeners alike. Launched in the early 2000s, it has become a favorite for those seeking high-quality sound and a range of versatile features to enhance their audio and visual experiences.

One of the standout features of the RX-V650 is its powerful audio performance. It delivers a robust 6.1-channel surround sound system, boasting a total output power of 100 watts per channel. This capability allows it to drive a wide array of speakers, creating an immersive listening experience for music and movies. With support for a range of surround sound formats, including Dolby Digital EX and DTS-ES, the RX-V650 can effectively place the listener in the heart of the action, providing outstanding sound quality for both cinema and music playback.

In addition to its audio prowess, the RX-V650 offers a wealth of connectivity options. It includes several digital inputs, such as optical and coaxial ports, which allow for easy integration of various multimedia devices, including DVD players, gaming consoles, and streaming devices. The inclusion of component video inputs also enables high-definition video playback, making it an ideal choice for modern home theater setups.

The receiver's advanced technology features Yamaha's proprietary YPAO (Yamaha Parametric room Acoustic Optimizer), which automatically calibrates speaker settings based on the unique acoustics of the room. This not only simplifies setup but also ensures that the audio quality is tailored to the environment, enhancing the overall listening experience.

Another noteworthy characteristic of the RX-V650 is its user-friendly interface. The on-screen display allows users to navigate various settings and options seamlessly, making it easy to customize sound profiles or switch between inputs. Additionally, the remote control is designed for simplicity, providing quick access to frequently used functions.

In conclusion, the Yamaha RX-V650 stands out as a powerful and feature-rich home theater receiver. With its impressive audio performance, comprehensive connectivity options, advanced technologies like YPAO, and user-friendly interface, it remains a solid choice for anyone looking to elevate their home entertainment experience. Whether for watching movies, listening to music, or gaming, the RX-V650 presents a balanced blend of power and versatility, fulfilling the demands of a modern home theater system.
Top Page Image Contents