Yamaha RX-V650 owner manual Troubleshooting for auto setup procedure, Before auto setup

Page 31

AUTO SETUP

■Troubleshooting for auto setup procedure

Before auto setup

Error message

Cause

Remedy

 

 

 

Connect MIC!

Optimizer microphone is not connected.

• Connect the supplied optimizer microphone to the

 

 

OPTIMIZER MIC jack on the front panel.

 

 

 

Unplug HP!

Headphones are connected.

• Unplug the headphones.

 

 

 

Errors during auto setup

Press SELECT to display detailed information about individual errors. Press j/ ito switch between error messages.

Error message

Cause

Remedy

 

 

 

E-1:NO FRONT SP

Front L/R channel signal(s) is (are) not

• Select the front speakers with SPEAKER A or B.

 

detected.

• Check the front left and right speaker connections.

 

 

 

E-2:NO SURR.SP

A surround channel signal is not detected.

• Check the surround speaker connections.

 

 

 

E-3:NO PRES. SP

A presence channel signal is not detected.

• Check the presence speaker connections.

 

 

 

E-4:SBR->SBL

Only right surround back channel signal is

• Connect the surround back speaker to the LEFT

 

detected.

SURROUND BACK SPEAKERS terminal if you

 

 

only have one surround back speaker.

 

 

 

E-5:NOISY

Background noise is too loud.

• Try the auto setup procedure in a quiet environment.

 

 

• Turn off noisy electric equipment like air conditioners

 

 

(etc.) or move them away from the optimizer

 

 

microphone.

 

 

 

E-6:CHECK SURR.

Surround back speaker(s) is (are) connected,

• Connect surround speakers when you use (a)

 

though surround L/R speakers are not.

surround back speaker(s).

 

 

 

E-7:NO MIC

The optimizer microphone was unplugged

• Do not touch the optimizer microphone during the

 

during the auto setup procedure.

auto setup procedure.

 

 

 

E-8:NO SIGNAL

The optimizer microphone does not detect test

• Check the microphone setting.

 

tones.

• Check the speaker connections and placement.

 

 

 

E-9:USER CANCEL

The auto setup procedure was cancelled due to

• Perform the auto setup procedure again. Do not adjust

 

user activity.

VOLUME (etc.) during the auto setup procedure.

 

 

 

E-10:OTHER ERROR

A DSP communication error or hangup

• Perform the auto setup procedure again.

 

occurred.

 

 

 

 

Warnings after auto setup

Press j/ i to display detailed information about individual warnings.

Warning message

Cause

Remedy

 

 

 

W-1:OUT OF PHASE

Speaker polarity is not correct. This message

• Check the speaker connections for proper polarity

 

may appear depending on the speakers even

(+ or –).

 

when the speakers are connected correctly.

 

 

 

 

W-2:OVER 24m

The distance between the speaker and the

• Bring the speaker closer to the listening position.

(80ft)

listening position is over 24 m.

 

 

 

 

 

 

W-3:LEVEL ERROR

The difference of volume level among speakers

• Readjust the speaker installation so that all speakers

 

is excessive. (No level correction is made.)

are set in locations with similar conditions.

 

 

• Check the speaker connections.

 

 

• Use speakers of similar quality and efficiency.

 

 

• Adjust the output volume of the subwoofer.

 

 

 

•If the ERROR or WARNING screens appears, check the cause of the problem, then perform the auto setup procedure again.

•If warning W-1 appears, corrections are made, but they may not be optimal.

•If warning W-2 or W-3 appears, no corrections are made.

•If error E-10 occurs repeatedly, please contact a qualified YAMAHA service center.

PREPARATION

English

29

Page 30 Page 32
Image 31
Page 30 Page 32
Contents RX-V650 Special Instructions for U.K. Model For U.K. customersContents Other features FeaturesBuilt-in 7-channel power amplifier Sound field featuresPlease check that you received all of the following parts Supplied accessoriesInstalling batteries in the remote control Getting StartedFront panel Controls and FunctionsEurope models only Remote control Handling the remote control Using the remote controlFront panel display Presence and surround back speaker indicators 96/24 indicatorLFE indicator Input channel indicatorsAC Outlets Rear panelVoltage Selector Speaker placement Speaker Setup10 mm Connecting to Presence speaker terminalsSpeaker connections Banana plug connectionsCenter Subwoofer System Presence speakersRight Left Right Left FrontSUB Woofer jack Front terminalsCenter terminals Surround terminalsDigital jacks ConnectionsCable indications Analog jacksVideo Monitor Connecting video componentsConnections for DVD playback DVD playerFor 6-channel input Connecting to the Multi CH Input jacksVideo AUX jacks on the front panel Connections for other video componentsUse these jacks to connect any video source, such as a MD recorder or Tape deck Connecting audio componentsConnections for audio components CD playerConnecting to an external amplifier 75-ohm/300-ohm antenna adapter Connecting the antennasConnecting the AM loop antenna Frequency Step switch Asia and General models onlyMemory back-up Connecting the AC power cordImpedance Selector switch Impedance Selector switchTurn on the video monitor connected to this unit Turning on the powerFront panel Optimizer microphone position Auto SetupOptimizer microphone setup IntroductionResultwiring Starting the setupAutomenu Resultexit ErrorError E-5 If an error screen appearsPress u / d to select Result LIST, then press Select When you are finished, press SelectResultwiring screen appears If a warning screen appearsBefore auto setup Troubleshooting for auto setup procedureErrors during auto setup Select the input source Adjust the volume to the desired output levelPlayback Basic operationsTo mute the sound To listen with headphones Silent CinemaTo adjust the tone Select a sound field program if desiredPlaying video sources Background Selecting sound field programsMulti CH Input Selecting Multi CH InputDecoders select with j Remote control operationEnjoying multi-channel software Auto AutoPRO Logic SUR. Enhanced Press q/DTS on the remote control to select the decoderEnjoying 2-channel software PRO Logic SUR. StandardPress Pure Direct to activate pure direct To cancel, press Pure Direct againListening to high fidelity stereo sound Night listening modesDownmixing to 2 channels Listening to unprocessed input signalsSelecting input modes StraightPress u / d to display the following Information about the input signalDisplaying information about the input SourceAutomatic and manual tuning TuningAutomatic tuning Press FM/AM to select the FM band Presetting stationsManual tuning Automatically presetting FM stationsAutomatic preset tuning options Manually presetting stationsRepeat steps 1 to 5 to store other stations Selecting preset stationsWhen performing this operation with the remote Control, first press Tuner to set the remote toPress and hold PRESET/TUNING Edit for more than 3 seconds See Selecting preset stationsReceiving RDS stations Changing the RDS mode PTY Seek function To cancel this functionPress PTY Seek Mode to set this unit PTY Seek modeEON function Recording Special considerations when recording DTS softwareFor movie/video sources Sound Field Program DescriptionsSUR. Standard Dolby DigitalSUR. Standard Dolby Digital SUR. EnhancedSUR. Standard PRO Logic PRO LogicRock Concert For music sourcesConcert Hall Jazz ClubP08 Movie Theater Selecting the OSD mode Using the sleep timerSetting the sleep timer Advanced OperationsSleep OFF Canceling the sleep timerPress j / i to adjust the speaker output level Press Select when you have completed your adjustmentOutputting the test tone from the Presence speakers Using the test tonePress AMP Press Test Option Menu SET MenuSound Menu Input MenuTo exit, press SET Menu when finished Using SET MenuPress u / d to select Manual Setup Press Select to enter Manual SetupSurr L/R SP Sound Menu 1/2Center SP Front SPCross Over Surr B L/R SPPresence SP LFE/BASS OUTCSP Distance 02ASUBWOOFER PhaseSpeaker distance CSP Distance Gaudio SET Dcenter GEQElfe Level Fdynamic RangeOptical OUT HPR/SB SelectInput Menu CMPNT-V InputAdisplay SET Binput ModeCoaxial Option MENU1/2Parameter initialization CPARAM. INI Bmemory GuardCPARAM. INI Dzone SETControlling other components Remote Control FeaturesControl area Controlling this unitInput area Category Manufacturer Setting manufacturer codesPress Code SET using a ballpoint pen or similar object Transmit indicator on the remote control flashes twiceVCR Controlling other componentsClearing a setup manufacturer code for component control Clearing setup manufacturer codesEditing Sound Field Parameters What is a sound field Changing parameter settingsElements of a sound field Press u / d to select the parameters Resetting parameters to the factory presetsTo reset a certain parameter To reset all parametersSound Field Parameter Descriptions INIT. DLY Initial delayRoom SIZE/P. Room Size Room size Liveness Surround liveness INIT. DLY Surround initial delaySB INIT. DLY Surround back initial delay Room Size Surround room sizeREV.TIME Reverberation time REV.DELAY Reverberation delayREV. Level Reverberation level For DTS Neo6 Music Image Center image DIALG.LIFT Dialog liftFor 7ch Stereo CT Width Center widthGeneral TroubleshootingOne side can be Sound suddenlyGoes off Only the speaker onSources cannot be Or DTS indicator onVolume level Dolby Digital or DTSTuner Does not work nor Remote controlFunction properly Press Straight Effect to select the desired setting Resetting the Factory PresetsBe sure this unit is in standby mode Factory Preset appears in the front panel displayAudio formats GlossaryPCM Linear PCM Sound field programsAudio information LFE 0.1 channelVideo signal Video signal informationComponent video signal Composite video signalSpecifications Citizen Korting VCR Satellite TunerCable TV DVD Player DVD RecorderLD Player CD PlayerMD Recorder CD RecorderTape Deck WD06180

RX-V650 specifications

The Yamaha RX-V650 is a dynamic and versatile home theater receiver that caters to audiophiles and casual listeners alike. Launched in the early 2000s, it has become a favorite for those seeking high-quality sound and a range of versatile features to enhance their audio and visual experiences.

One of the standout features of the RX-V650 is its powerful audio performance. It delivers a robust 6.1-channel surround sound system, boasting a total output power of 100 watts per channel. This capability allows it to drive a wide array of speakers, creating an immersive listening experience for music and movies. With support for a range of surround sound formats, including Dolby Digital EX and DTS-ES, the RX-V650 can effectively place the listener in the heart of the action, providing outstanding sound quality for both cinema and music playback.

In addition to its audio prowess, the RX-V650 offers a wealth of connectivity options. It includes several digital inputs, such as optical and coaxial ports, which allow for easy integration of various multimedia devices, including DVD players, gaming consoles, and streaming devices. The inclusion of component video inputs also enables high-definition video playback, making it an ideal choice for modern home theater setups.

The receiver's advanced technology features Yamaha's proprietary YPAO (Yamaha Parametric room Acoustic Optimizer), which automatically calibrates speaker settings based on the unique acoustics of the room. This not only simplifies setup but also ensures that the audio quality is tailored to the environment, enhancing the overall listening experience.

Another noteworthy characteristic of the RX-V650 is its user-friendly interface. The on-screen display allows users to navigate various settings and options seamlessly, making it easy to customize sound profiles or switch between inputs. Additionally, the remote control is designed for simplicity, providing quick access to frequently used functions.

In conclusion, the Yamaha RX-V650 stands out as a powerful and feature-rich home theater receiver. With its impressive audio performance, comprehensive connectivity options, advanced technologies like YPAO, and user-friendly interface, it remains a solid choice for anyone looking to elevate their home entertainment experience. Whether for watching movies, listening to music, or gaming, the RX-V650 presents a balanced blend of power and versatility, fulfilling the demands of a modern home theater system.
Top Page Image Contents