Mitsubishi Electronics DX-PC manual  Frame Layout

User’s Manual

Select the desired screen layout using the layout toolbar. When changing the screen layout, the selected camera on the current screen will be located in the first cell of the new layout. When in one of the multi- view formats, selecting Previous Cameras or Next Cameras will move to the previous or next page. In other words, when viewing Cameras 1 to 4 in the quad format, selecting Previous Cameras will display Cameras 61 to 64 and selecting Next Cameras will display Cameras 5 to 8. Selecting Full Screen enters the full-screen mode. To return to the previous screen mode, press the Esc key on the keyboard or select FullScreen Close (x) from the popup menu displayed by clicking the right mouse button.

Frame Layout

–Layout Load: Select the desired frame layout and click the Load button to apply the selected frame layout to DX-PC For View.

Default Layout: Displays the panels that are used most frequently in the Watch and Search screen modes.

Admin Layout: Displays only the panels that are used most frequently in the Admin screen mode.

Full Layout: Displays all the panels.

Hide Layout: Hides all panels and displays only the screen.

User Defined Layout: Displays the user-defined layout.

–Layout Setup: The user can configure the frame layout by displaying panels on the screen where they are most convenient. Set up the user-defined frame layout.

Always Load Layout at DX-PC For View Startup: Select whether or not the selected frame layout loads automatically when DX-PC For View starts.

Save: Enter a layout name and click the Save button to save the current frame layout as a new user-defined layout.

Rename: Select the layout to change from the Layout List and click the Rename button. Then change the layout name.

Delete: Select the layout to delete from the Layout List and click the Delete button.

NOTE: Up to 10 user-defined layouts can be saved.

30