User’s Manual
NOTE: Refer to the manual for each applicable remote DVR for more details on system setup.
Remote System Log: Displays the system log information of the remote DVR connected to the Status View panel.
Remote Event Log: Displays the event log information of the remote DVR connected to the Status panel.
NOTE: Refer to 3.3 Menu – Remote Menu for more details on the Remote System Log and Remote Event Log.
NOTE: When the remote site is not connected to the Status View panel, Remote Setup, Remote System Log and Remote Event Log menus can be accessed by clicking the right mouse button after selecting the remote site on the Remote Sites panel.
Remote Panic Control: Controls the panic recording of the remote DVR connected to the Status View panel. The 
(On) button indicates that the remote DVR is not in the panic recording mode and you can start panic recording by clicking the button. The 
(Off) button indicates that the remote DVR is in the panic recording mode and you can stop panic recording by clicking the button.
NOTE: Remote Panic Control may not be supported, depending on the specifications and version of the remote DVR.
Status Display Window
The Status Display Window displays the event, alarm out, system check and recording status information of the remote system connected to the Status View panel in
NOTE: Depending on the specifications of the remote DVR, status display may not be supported.
Event: Displays event (Motion Detection, Alarm In). The status display of event detection will continue during the preset dwell time of the
Event Detection
No Event Detection
Event Off
Alarm Out: Displays status of the
No |
System Check: Displays the function status of the camera, alarm, and recording.
Normal | Irregular | System Check Off |
Record From/To: Displays the record period.
Status: Displays the recording, playback, archiving,
On | Off |
Version: Displays the system version information.
44