C o n t a c t s l i s t
3.Write down your interaction with the recorded prompts
Dial 083210, pause 5 seconds, press 1, pause 2 seconds, press 1234, and press *.
Be precise; you will need this information in ”Set up voice mail with dialling codes” on page 14.
Insert dialling codes
Press * repeatedly to cycle through dialling codes. When the desired code appears in the display, pause briefly and the code is inserted into the dialling string.
The following dialling codes are available:
Dialling | Indicates... | |
code | ||
| ||
|
| |
* | Bypasses a set of | |
| instructions. | |
|
| |
+ | Causes the international | |
| access code to be | |
| replaced by +. | |
|
| |
p | Pauses for 2.5 seconds | |
| before sending any | |
| numbers that follow. | |
|
| |
w | Waits for you to press | |
| the call key before | |
| sending the numbers or | |
| codes that follow. | |
|
|
Set up voice mail with dialling codes
1.In the standby mode, select Contacts > Speed dials.
2.Scroll to an empty speed dialling slot, and select Assign.
3.Enter your voice mailbox number, including the area code.
4.Refer to dialling codes, and enter any codes as necessary using the information that you saved from ”Write down number and process” on page 13.
For example, if you pause for 5 seconds after connecting to voice mail, enter p twice after the voice mailbox number, for example, 083210pp.
5.Enter any remaining pauses or other information that allows you to listen to your messages, and select OK.
6.Enter a name (such as voice mail), and select OK.
To dial and listen to your voice mail, press and hold the assigned speed dialling key in the standby mode.
Save addresses and notes
To save an address or note, add it to an existing entry (contact).
1.In the standby mode, scroll down to display a list of entries in your contacts list.
14