Oregon Scientific PV 100 user manual Installing Software Drivers WINDOWS-BASED PC

EN

NOTE: All image / movies can be viewed in Playback Mode or the camera can be used as a TV Cam in Record Mode.

INSTALLING SOFTWARE DRIVERS (WINDOWS-BASED PC)

Use the USB cable included to connect the camera to your Windows- based PC. This enables you to transfer, edit, and playback pictures and movies onto your PC.

Users of Windows 98SE-based PCs must install the software first before connecting the camera to the computer.

1.Insert the CD labelled "PV100" into your CD-ROM drive. The installation will start automatically.

2.If the "autorun" feature is disabled on your PC, start the installation by running [x:\setup.exe] where "x:" is the drive letter of the CD-ROM drive.

3.Follow the on-screen instruction to complete the installation of the camera drivers and software. When done, click on the [Finish] button on-screen to restart the PC.

NOTE: The Macintosh does not require software driver installation.

TRANSFERRING FILES FROM CAMERA TO PC OR MACINTOSH

NOTE: Only the images and movies stored in the camera's current memory device (SD card or internal memory) will be visible on the PC or Macintosh.

NOTE: The LCD is automatically off when the camera is connected to the PC or Macintosh.

1.Turn on your PC or Macintosh and allow your system's operating system to boot up.

2.Turn off your digital camera. Connect the camera and your PC or Macintosh via the USB cable.

3.Turn on your digital camera to any mode. The device's status lamp will blink.

27

PV100 Eng R7 a OP 28 9/9/04, 2:45 PM