Oregon Scientific PV 100 user manual Auto OFF Auto POWER-OFF, Tv Out, File Number

EN

AUTO OFF (AUTO POWER-OFF)

You can set the camera to turn off automatically when no operation is performed. The period of time before shut-down can be adjusted (None, 1 min., 3 min., or 5 min.) The default auto off time setting is 3 min.

NOTE: Auto Off is not available in slideshow mode or when the camera is connected to a PC.

TV OUT

If connecting the camera to a TV, you can set the camera’s TV output system to either the PAL or NTSC standards. The default TV Out setting is set to PAL.

FILE NUMBER

Your camera keeps an internal file counter for every image and movie taken that can be reset. The setting options are Continue and New (default setting).

NOTE: All files are stored within a designated folder. The initial folder is always numbered at 100.

A.Under the Continue default option, the internal file counter is first set to “0001”. Every subsequent picture is assigned an incremental File Number.

NOTE: The internal file counter increments by 1 regardless of the media unless it is reset.

B.Under the New option, the internal file counter to “0001” for new media only. But in case there are image files already present inside the storage media, it will start counting from the highest file number of the media.

NOTE: The File Number setting should be set to New only if either the internal memory or SD card has been newly formatted, or a completely new SD card has been installed.

13

PV100 Eng R7 a OP 14 9/9/04, 2:45 PM