Light & Motion BLUEFIN HC7 manual Removing Batteries, Mounting Battery Pods, Light Operation

Page 25

Removing Batteries

1.Rotate latch at the front of the pod counter-clockwise 1/8 turn, until it stops.

2.Pull the front cap off the pod.

3.Pull the battery from the pod using removal strap.

Mounting Battery Pods

1.Remove the rear plate of the housing.

2.Slide the battery pods into housing channels.

3.Insert Pod Locker between the pods and tighten using 1/8” Allen key. Do not over-tighten.

Connecting Lights to Battery Pods

1.Plug in the cable connectors on the pod.

2.Tighten the locking sleeves by rotating clockwise until tight.

3.Plug in the cable connectors on the Light Head. (Pro Lights only)

4.Tighten the locking sleeves by rotating clockwise until tight.

Light Operation

Confirm that the mode selector (flat position of bezel around power button) is set to the P setting for Pro or Mini Pro Lights or E for Mini Elite Lights (Refer Fig 27).

Operation from Smart Grips

1.Activate initial power-up by pressing the Pod Power Button (Refer Fig 27).

After initial power-up lights may be controlled using LIGHT button on the left Smart Grip.

2.Turn off lights by pressing and holding the LIGHT button.

Operation from Battery Pods

1.Turn on light by pressing the Power Button on the rear cap.

2.Turn off light by pressing and holding the Power Button on the rear cap.

23

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Bluefin HC7 Page Fault Free Warranty Optional Standard WarrantyWelcome Table of Contents Getting Started Camera Preparation Menu Setup See P-MENU Matrix on Reset the P-MENU to its factory conditionSort an item on the P-MENU Add an item to the P-MENU On HC7 P-Menu Menu MatrixOperation Mounting the CameraLeft Smart Grip Controls Refer Fig AF/Off Tele Lights Photo Dis Far/+ NearWide Right Smart Grip Controls Refer Fig Housing Left Side Refer FigRec Toggles camcorder between record/standby ON/MODE Button Lights Not used Photo Captures still image to Memory Stick Using the Bluefin in VTR ModeTele Stop Wide Slow Motion To Install Lens Lens Installation / RemovalRevert to original button configuration Reversing Smart Grip Button FunctionsBluefin Monitors Getting Started Bluefin Monitor Bulkhead InstallationCompact Monitor Operation Attaching the Remote or Compact MonitorRemote Monitor Operation Power On/Off with Remote MonitorRec Toggles between record and stand-by modes Diving Without a Monitor Attached Charging the Remote and Compact MonitorBluefin Light Systems Getting Started Sunray Pro Light System Battery PodsDisplay Icons on Monitors Sunray-S Mini Elite Light System Sunray-S Mini Pro Light SystemCharging Batteries Installing BatteriesConnecting Lights to Battery Pods Mounting Battery PodsRemoving Batteries Light OperationRemove housing from the rinse tank and towel dry Pre-Dive ChecklistFirst Time Use After Diving CareReplacing Handle Batteries Housing StorageFollow these steps for proper O-ring function Ring Care & MaintenanceBluefin O-ring Replacement Kit 802-0096 includes Other MaintenanceSmart Grip O-ring and Battery Kit 802-0117 includes Clean the Connectors Pay special attention to the conditionContact Light and Motion Returning Products for CareBluefin Accessories Cannery Row Monterey, CA

BLUEFIN HC7 specifications

The Light & Motion BLUEFIN HC7 is an advanced underwater housing designed specifically for the HERO 7 camera, combining rugged durability with exceptional functionality. This housing is ideal for underwater filmmakers and photographers seeking to capture stunning high-definition content beneath the surface.

One of the standout features of the BLUEFIN HC7 is its robust construction, crafted from high-quality aluminum, which offers outstanding resistance to corrosion and wear. This makes it particularly suited for saltwater environments, ensuring longevity and reliability during extended underwater sessions. Furthermore, the housing is depth-rated to an impressive 60 meters, making it perfect for adventures involving deep dives or aquatic exploration.

The BLUEFIN HC7 integrates cutting-edge optical technology designed to maximize image quality. It employs a premium optical glass lens port that minimizes distortion and reflections. This allows users to achieve crisp and clear images, particularly in challenging underwater lighting conditions. Additionally, the housing supports the HERO 7’s advanced features, including 4K video resolution and HyperSmooth stabilization, enabling the capture of smooth, professional-grade footage.

Another key characteristic of the BLUEFIN HC7 is its user-friendly design. The housing includes easily accessible control buttons, allowing easy navigation through camera settings while underwater. This feature is particularly important for capturing spontaneous moments or adjusting settings on the fly without the need to remove the camera from the housing.

To further enhance versatility, the BLUEFIN HC7 offers multiple mounting options, accommodating a range of accessories such as lights and external microphones. This flexibility enables users to customize their setups based on specific shooting conditions or creative needs, helping to elevate the overall production quality of their underwater content.

Moreover, the BLUEFIN HC7 boasts an integrated buoyancy feature that allows the housing to float, reducing the risk of losing equipment in the water. This element is invaluable for maintaining peace of mind during underwater excursions.

Overall, the Light & Motion BLUEFIN HC7 embodies a harmonious blend of durability, functionality, and innovation, making it an excellent choice for any serious underwater videographer or photographer. With its extensive range of features and thoughtful design, it stands out as a leading solution in the realm of underwater imaging technology.
Top Page Image Contents