Light & Motion BLUEFIN HC7 manual Charging Batteries, Installing Batteries

Page 24

Charging Batteries

It is recommended that you charge your batteries when they are received. It is also recommended to charge batteries just prior to use.

1.The charger can accept an electrical range of 100 - 240v and 50 - 60hz.

2.The charger has two LED lights:

Left LED:

Green when charging NiMH batteries.

Right LED:

Orange when fast charging.

 

Green during top-up charge and when charge is complete.

3.To attach charger to battery, align arrow on charger connector with arrow on battery label and push together until connectors seat (Refer Fig. 25).

Note: The fast charger time is approximately 2.5 hours.

(Fig. 25)

(Fig. 26)

Installing Batteries

1.Slide the battery back into the pod with the contact end inserted first so that the connector will align with the socket inside the pod (Refer Fig. 26).

2.Inspect the O-ring on the pod cap. (See O-ring maintenance).

3.Replace the front cap onto the pod.

Note: Insure that the removal strap attached to the battery does not interfere with the seal when the end cap is attached to the pod.

4.Turn the knob on the end cap clockwise 1/8 turn until it stops. The end cap will now be locked into place. The end caps are specific to the left and right pods.

22

Image 24
Contents Bluefin HC7 Page Standard Warranty Fault Free Warranty OptionalWelcome Table of Contents Getting Started Camera Preparation Reset the P-MENU to its factory condition Menu Setup See P-MENU Matrix onSort an item on the P-MENU Add an item to the P-MENU Menu Matrix On HC7 P-MenuMounting the Camera OperationLeft Smart Grip Controls Refer Fig Lights Photo Dis Far/+ Near AF/Off TeleWide Housing Left Side Refer Fig Right Smart Grip Controls Refer FigRec Toggles camcorder between record/standby ON/MODE Button Using the Bluefin in VTR Mode Lights Not used Photo Captures still image to Memory StickTele Stop Wide Slow Motion Lens Installation / Removal To Install LensRevert to original button configuration Reversing Smart Grip Button FunctionsBluefin Monitor Bulkhead Installation Bluefin Monitors Getting StartedAttaching the Remote or Compact Monitor Compact Monitor OperationPower On/Off with Remote Monitor Remote Monitor OperationRec Toggles between record and stand-by modes Charging the Remote and Compact Monitor Diving Without a Monitor AttachedSunray Pro Light System Battery Pods Bluefin Light Systems Getting StartedDisplay Icons on Monitors Sunray-S Mini Pro Light System Sunray-S Mini Elite Light SystemInstalling Batteries Charging BatteriesMounting Battery Pods Connecting Lights to Battery PodsRemoving Batteries Light OperationPre-Dive Checklist Remove housing from the rinse tank and towel dryFirst Time Use After Diving CareHousing Storage Replacing Handle BatteriesRing Care & Maintenance Follow these steps for proper O-ring functionOther Maintenance Bluefin O-ring Replacement Kit 802-0096 includesSmart Grip O-ring and Battery Kit 802-0117 includes Clean the Connectors Pay special attention to the conditionReturning Products for Care Contact Light and MotionBluefin Accessories Cannery Row Monterey, CA

BLUEFIN HC7 specifications

The Light & Motion BLUEFIN HC7 is an advanced underwater housing designed specifically for the HERO 7 camera, combining rugged durability with exceptional functionality. This housing is ideal for underwater filmmakers and photographers seeking to capture stunning high-definition content beneath the surface.

One of the standout features of the BLUEFIN HC7 is its robust construction, crafted from high-quality aluminum, which offers outstanding resistance to corrosion and wear. This makes it particularly suited for saltwater environments, ensuring longevity and reliability during extended underwater sessions. Furthermore, the housing is depth-rated to an impressive 60 meters, making it perfect for adventures involving deep dives or aquatic exploration.

The BLUEFIN HC7 integrates cutting-edge optical technology designed to maximize image quality. It employs a premium optical glass lens port that minimizes distortion and reflections. This allows users to achieve crisp and clear images, particularly in challenging underwater lighting conditions. Additionally, the housing supports the HERO 7’s advanced features, including 4K video resolution and HyperSmooth stabilization, enabling the capture of smooth, professional-grade footage.

Another key characteristic of the BLUEFIN HC7 is its user-friendly design. The housing includes easily accessible control buttons, allowing easy navigation through camera settings while underwater. This feature is particularly important for capturing spontaneous moments or adjusting settings on the fly without the need to remove the camera from the housing.

To further enhance versatility, the BLUEFIN HC7 offers multiple mounting options, accommodating a range of accessories such as lights and external microphones. This flexibility enables users to customize their setups based on specific shooting conditions or creative needs, helping to elevate the overall production quality of their underwater content.

Moreover, the BLUEFIN HC7 boasts an integrated buoyancy feature that allows the housing to float, reducing the risk of losing equipment in the water. This element is invaluable for maintaining peace of mind during underwater excursions.

Overall, the Light & Motion BLUEFIN HC7 embodies a harmonious blend of durability, functionality, and innovation, making it an excellent choice for any serious underwater videographer or photographer. With its extensive range of features and thoughtful design, it stands out as a leading solution in the realm of underwater imaging technology.