Light & Motion BLUEFIN HC7 manual Housing Storage, Replacing Handle Batteries

Page 27

Housing Storage

Store housing and Travel Case in a dry location the first 24 hours after a dive. Leave the Rear Plate off the housing to allow for air circulation. Similarly, leave Travel Case Lid about two inches open. Allow any residual water to evaporate from the Travel Case prior to storing the housing.

Replacing Handle Batteries

1.Using an Allen key, remove the two screws on the back of the handle. (Refer fig. 28)

2.Remove the Handle Cap from the handle assembly (Refer fig. 29).

3.Remove old batteries from handle board.

4.Install new 1/3 N batteries into the handle board (Refer. fig. 30).

Note: The +/- position of the batteries is critical. If batteries are installed backwards, they will damage the handle board.

5.Inspect the Handle Cap O-ring or replace with a new O-ring.

6.Press the Handle Cap into the handle assembly so O-ring seals evenly.

7.Replace both screws in Handle Cap and tighten using Allen key.

Smart Grip O-ring and Battery Kit—Part # 802-0117 (Refer fig. 31)

Kit contains one O-ring and battery set for one Smart Grip.

 

 

 

(Fig. 28)

 

(Fig. 29)

25

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Bluefin HC7 Page Fault Free Warranty Optional Standard WarrantyWelcome Table of Contents Getting Started Camera Preparation Menu Setup See P-MENU Matrix on Reset the P-MENU to its factory conditionSort an item on the P-MENU Add an item to the P-MENU On HC7 P-Menu Menu MatrixMounting the Camera OperationLeft Smart Grip Controls Refer Fig Lights Photo Dis Far/+ Near AF/Off TeleWide Housing Left Side Refer Fig Right Smart Grip Controls Refer FigRec Toggles camcorder between record/standby ON/MODE Button Using the Bluefin in VTR Mode Lights Not used Photo Captures still image to Memory StickTele Stop Wide Slow Motion Reversing Smart Grip Button Functions Lens Installation / RemovalTo Install Lens Revert to original button configurationBluefin Monitors Getting Started Bluefin Monitor Bulkhead InstallationCompact Monitor Operation Attaching the Remote or Compact MonitorPower On/Off with Remote Monitor Remote Monitor OperationRec Toggles between record and stand-by modes Diving Without a Monitor Attached Charging the Remote and Compact MonitorSunray Pro Light System Battery Pods Bluefin Light Systems Getting StartedDisplay Icons on Monitors Sunray-S Mini Elite Light System Sunray-S Mini Pro Light SystemCharging Batteries Installing BatteriesLight Operation Mounting Battery PodsConnecting Lights to Battery Pods Removing BatteriesAfter Diving Care Pre-Dive ChecklistRemove housing from the rinse tank and towel dry First Time UseReplacing Handle Batteries Housing StorageFollow these steps for proper O-ring function Ring Care & MaintenanceClean the Connectors Pay special attention to the condition Other MaintenanceBluefin O-ring Replacement Kit 802-0096 includes Smart Grip O-ring and Battery Kit 802-0117 includesContact Light and Motion Returning Products for CareBluefin Accessories Cannery Row Monterey, CA

BLUEFIN HC7 specifications

The Light & Motion BLUEFIN HC7 is an advanced underwater housing designed specifically for the HERO 7 camera, combining rugged durability with exceptional functionality. This housing is ideal for underwater filmmakers and photographers seeking to capture stunning high-definition content beneath the surface.

One of the standout features of the BLUEFIN HC7 is its robust construction, crafted from high-quality aluminum, which offers outstanding resistance to corrosion and wear. This makes it particularly suited for saltwater environments, ensuring longevity and reliability during extended underwater sessions. Furthermore, the housing is depth-rated to an impressive 60 meters, making it perfect for adventures involving deep dives or aquatic exploration.

The BLUEFIN HC7 integrates cutting-edge optical technology designed to maximize image quality. It employs a premium optical glass lens port that minimizes distortion and reflections. This allows users to achieve crisp and clear images, particularly in challenging underwater lighting conditions. Additionally, the housing supports the HERO 7’s advanced features, including 4K video resolution and HyperSmooth stabilization, enabling the capture of smooth, professional-grade footage.

Another key characteristic of the BLUEFIN HC7 is its user-friendly design. The housing includes easily accessible control buttons, allowing easy navigation through camera settings while underwater. This feature is particularly important for capturing spontaneous moments or adjusting settings on the fly without the need to remove the camera from the housing.

To further enhance versatility, the BLUEFIN HC7 offers multiple mounting options, accommodating a range of accessories such as lights and external microphones. This flexibility enables users to customize their setups based on specific shooting conditions or creative needs, helping to elevate the overall production quality of their underwater content.

Moreover, the BLUEFIN HC7 boasts an integrated buoyancy feature that allows the housing to float, reducing the risk of losing equipment in the water. This element is invaluable for maintaining peace of mind during underwater excursions.

Overall, the Light & Motion BLUEFIN HC7 embodies a harmonious blend of durability, functionality, and innovation, making it an excellent choice for any serious underwater videographer or photographer. With its extensive range of features and thoughtful design, it stands out as a leading solution in the realm of underwater imaging technology.
Top Page Image Contents