Light & Motion BLUEFIN HC7 Ring Care & Maintenance, Follow these steps for proper O-ring function

Page 28

 

 

 

(Fig. 30)

 

(Fig. 31)

O-ring Care & Maintenance

O-rings are the critical component that keeps water out of the housing. Routinely inspect O-rings and replace at least once a year. If your O-rings are damaged, contact the Light & Motion service department for an O-ring replacement kit.

Follow these steps for proper O-ring function.

1.The sealing system used on the rear plate incorporates two O-rings. This is the most critical area of the housing for maintenance and should be inspected before every dive.

2.Make sure the rear plate O-rings and the mating surface on the inside of the main housing are free of grit, hair, lint and anything that could breach the O-ring seal.

3.After frequent diving or if O-rings appear dirty, remove O-rings and clean the grooves. To remove O-rings, use finger pressure or the rounded edge of a plastic card to lift the O-ring out of the groove.

Note: Never use a metal object to remove an O-ring. It will

cause damage to the O-ring and mating surface.

4.To check O-rings for damage, place the O-ring between the index finger and thumb. Then pull the O-ring through your fingers, feeling for any debris or wear.

5.If O-rings are dirty, it is best to replace them. Washing dirty O-rings with soap and water is not recommended. Soap breaks down the lubricants and will compromise the integrity of the seal.

6.Properly greased O-rings will help maintain sealing integrity and minimize O-ring degradation. Use enough grease to lubricate the O-ring thoroughly, but not so much that it will attract additional debris.

7.Clean the groove with a lint free swab or the folded edge of a paper towel.

8.All of the front optic ports for the housing also utilize two O-ring seals. Also check these seals every time the optic is removed.

26

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Bluefin HC7 Page Standard Warranty Fault Free Warranty OptionalWelcome Table of Contents Getting Started Camera Preparation Reset the P-MENU to its factory condition Menu Setup See P-MENU Matrix onSort an item on the P-MENU Add an item to the P-MENU Menu Matrix On HC7 P-MenuOperation Mounting the CameraLeft Smart Grip Controls Refer Fig AF/Off Tele Lights Photo Dis Far/+ NearWide Right Smart Grip Controls Refer Fig Housing Left Side Refer FigRec Toggles camcorder between record/standby ON/MODE Button Lights Not used Photo Captures still image to Memory Stick Using the Bluefin in VTR ModeTele Stop Wide Slow Motion Lens Installation / Removal To Install LensRevert to original button configuration Reversing Smart Grip Button FunctionsBluefin Monitor Bulkhead Installation Bluefin Monitors Getting StartedAttaching the Remote or Compact Monitor Compact Monitor OperationRemote Monitor Operation Power On/Off with Remote MonitorRec Toggles between record and stand-by modes Charging the Remote and Compact Monitor Diving Without a Monitor AttachedBluefin Light Systems Getting Started Sunray Pro Light System Battery PodsDisplay Icons on Monitors Sunray-S Mini Pro Light System Sunray-S Mini Elite Light SystemInstalling Batteries Charging BatteriesMounting Battery Pods Connecting Lights to Battery PodsRemoving Batteries Light OperationPre-Dive Checklist Remove housing from the rinse tank and towel dryFirst Time Use After Diving CareHousing Storage Replacing Handle BatteriesRing Care & Maintenance Follow these steps for proper O-ring functionOther Maintenance Bluefin O-ring Replacement Kit 802-0096 includesSmart Grip O-ring and Battery Kit 802-0117 includes Clean the Connectors Pay special attention to the conditionReturning Products for Care Contact Light and MotionBluefin Accessories Cannery Row Monterey, CA

BLUEFIN HC7 specifications

The Light & Motion BLUEFIN HC7 is an advanced underwater housing designed specifically for the HERO 7 camera, combining rugged durability with exceptional functionality. This housing is ideal for underwater filmmakers and photographers seeking to capture stunning high-definition content beneath the surface.

One of the standout features of the BLUEFIN HC7 is its robust construction, crafted from high-quality aluminum, which offers outstanding resistance to corrosion and wear. This makes it particularly suited for saltwater environments, ensuring longevity and reliability during extended underwater sessions. Furthermore, the housing is depth-rated to an impressive 60 meters, making it perfect for adventures involving deep dives or aquatic exploration.

The BLUEFIN HC7 integrates cutting-edge optical technology designed to maximize image quality. It employs a premium optical glass lens port that minimizes distortion and reflections. This allows users to achieve crisp and clear images, particularly in challenging underwater lighting conditions. Additionally, the housing supports the HERO 7’s advanced features, including 4K video resolution and HyperSmooth stabilization, enabling the capture of smooth, professional-grade footage.

Another key characteristic of the BLUEFIN HC7 is its user-friendly design. The housing includes easily accessible control buttons, allowing easy navigation through camera settings while underwater. This feature is particularly important for capturing spontaneous moments or adjusting settings on the fly without the need to remove the camera from the housing.

To further enhance versatility, the BLUEFIN HC7 offers multiple mounting options, accommodating a range of accessories such as lights and external microphones. This flexibility enables users to customize their setups based on specific shooting conditions or creative needs, helping to elevate the overall production quality of their underwater content.

Moreover, the BLUEFIN HC7 boasts an integrated buoyancy feature that allows the housing to float, reducing the risk of losing equipment in the water. This element is invaluable for maintaining peace of mind during underwater excursions.

Overall, the Light & Motion BLUEFIN HC7 embodies a harmonious blend of durability, functionality, and innovation, making it an excellent choice for any serious underwater videographer or photographer. With its extensive range of features and thoughtful design, it stands out as a leading solution in the realm of underwater imaging technology.
Top Page Image Contents