Kodak DX4530 manual Turning On the Camera, Changing the Display, Turn off the camera

Chapter 1

Turning On the Camera

Ready light Mode dial

OK

AUTO

1Remove the lens cap.

If you do not remove the lens cap, it comes off automatically when you turn on the camera.

2Turn the Mode dial from Off to any other position.

The ready light blinks green while the camera performs a self-check.

When the ready light glows steady green, the camera is ready to take pictures (or

videos, if the mode dial is set to ). In Still and Video modes, a status area appears on the camera screen.

Changing the Display

To	Do This
Turn Liveview on so that the camera	Press the OK button. To turn it off,
screen can be used as a viewfinder	press the OK button again.
Change the Liveview setting so that it	See page 51.
is on whenever the camera is on
Turn the status area back on after it	Press	.
times out
Turn off the camera	1 Turn the Mode dial to Off.
	The camera completes
	operations that are in process.
	2 Replace the lens cap.

7