Chapter 6
Changing the Print Quantity Default
The Default Print Quantity setting determines the value that is displayed on the Share Print screen (page 46). The default value is 1.
1Press the Menu button.
2Press 
to highlight Setup 
, then press the OK button.
3Highlight Default Print Quantity 
, then press the OK button.
4Press 
to indicate the new default quantity, then press the OK button.
5Press the Menu button to exit the menu. This setting remains until you change it.
Turning Off Quickview
After you take a picture or video, Quickview displays it on the camera screen for approximately 5 seconds (see page 21 and page 34). To save battery power, turn off Quickview.
1Press the Menu button.
2Press 
to highlight Setup 
, then press the OK button.
3Press 
to highlight Quickview 
, then press the OK button.
4Press 
to highlight Off, then press the OK button.
5Press the Menu button to exit the menu.
The picture is not displayed on the camera screen after you take it. To see the picture or video, press the Review button. This setting remains until you change it.
50