Kodak DX4530 manual Camera/Computer Communications

Chapter 10

Camera/Computer Communications

Problem	Cause	Solution
The computer	Camera power is off.	Turn on the camera
cannot		(page 7).
communicate
	Battery is not charged.	Replace (page 5) or recharge
with the camera.
		the batteries (page 66).
	Some Advanced Power	See the Power Management
	Management utilities on	section of your laptop user’s
	laptops can turn off ports	guide to disable this feature.
	to save battery life.
	USB cable is not securely	Connect cable to camera and
	connected.	computer port (page 59).
	Software is not installed.	Install the software
		(page 55).
	The Battery Monitor or	Close that software before
	similar software runs	starting the Kodak EasyShare
	constantly.	software.
Cannot transfer	Software is not installed	Disconnect USB cable (if using
pictures to	on computer.	camera dock, disconnect
computer. The		cable and remove camera
Add New		from dock). Install Kodak
Hardware		EasyShare software (page 55).
Wizard cannot
locate drivers.

75