Light & Motion TITAN D100 manual Welcome, Table of Contents

Page 2

Welcome

Congratulations on your purchase of the Titan D100 digital SLR housing.

Please inspect the packaging of your product to verify that there was no damage during shipping.

If you are not familiar with your camera’s features, please take time to become familiar with the camera before you proceed in this manual. This manual assumes you have a working knowledge of your camera and will only cover operational procedures relative to the underwater housing.

Periodically refer to the website for instruction revisions.

http://www.uwimaging.com

Caution - Caution - Caution - Caution - Caution

We hope you have a wonderful underwater experience with Light & Motion equipment. To increase your enjoyment and the life span of your new gear please take an extra minute to review these general recommendations.

Check the operation of all your equipment several weeks prior to your trip. If mainte- nance or repair is necessary, then time is available for both shipping and repair schedul- ing.

Never transport or ship the housing with the camera inside.This may damage your cam- era.

Never leave your housing in the rinse bucket, it may be damaged by other equipment.

When removing the camera from the housing after a dive, do so in a dry controlled envi- ronment away from other SCUBA related equipment. This prevents water from other equipment or water from another diver accidentally entering the housing.

If a product is flooded, immediately rinse it with fresh water. Most parts will be salvage- able if not corroded by salt water.

Table of Contents

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

First Time Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Camera Preparation

6

Installing Battery Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installing the D100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Titan D100 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Attaching Strobes

14

Installing Bulkheads

14

Attaching Sync Cables to Titan

14

Pre-Dive Checklist

15

ROC and Focus Controls

15

Changing D100 Lenses

20

Attaching Light & Motion Lens Gears

20

Attaching and Removing Ports and Conversion Rings

20

Installing optional Mod Lights

22

Replacing ROC Handle Batteries

22

Replacing Handle Thread Rings

24

Moisture Alarm

24s

After Diving Care

25

O-ring Care and Maintenance

25

Titan D100 Accessories

.26

Returning Products for Care

. 27

Contact Light & Motion

. 27

Image 2
Contents Standard Warranty Fault Free Warranty OptionalTable of Contents WelcomeFirst Time Use Battery BoardGetting Started Camera PreparationInstalling the D100 Battery BoardRear Plate Controls Titan D100 ControlsTop Controls Left Side ControlsRight Smart Grip Fig Front ControlsLeft Smart Grip Fig Attaching Sync Cables to Titan Installing BulkheadsAttaching Strobes Nikonos StylePre-Dive Checklist ROC and Focus ControlsUsing ROC for strobe control Using ROC for AE-L / AF-LAttaching Light & Motion Lens gears Changing D100 LensesAttaching Light & Motion Ports / Conversion Rings Installing the Pointer Light Optional Installing Mod LightInstalling Sunray Mod Light Optional Then snap Mod Light and arm assembly on the base FigMoisture Alarm Replacing Handle Thread RingsRemove housing from rinse tank and then simply towel dry Ring Care and MaintenanceTitan D100 Accessories After Diving CareSales Department Returning Products for CareContact Light and Motion