5.Connecting a TV- source to the KODAK DP850 ULTRA
A TV-tuner is optional for the
KODAK DP850 ULTRA
Figure 11: Connecting to TV- source
NOTE! Requires TV tuner to be installed.
In order to use the KODAK DP850 ULTRA as a TV out- put; connect the TV antenna to the TV connector on the KODAK DP850 ULTRA plug panel.
The KODAK DP850 ULTRA behaves just like a normal TV. See the menus section 7.2.6 on how to adjust the TV settings.
There are basically three ways of receiving the TV signals to the KODAK DP850 ULTRA:
◆Antenna (Terrestrial)
◆Cable
◆Set-up box for satellite
These three work differently and it is important to consider the options of each when adjusting the KODAK DP850 ULTRA settings.
Antenna
When you adjust your TV to signals from an antenna you must store each channel in a different program. . The same is true for the KODAK DP850 ULTRA TV- tuner. When connected to an antenna you assign the different channels to the programs in the Television Setup Menu. Then you use the Up and Down arrows in the menu, remote control or the channel up/down button on the control panel to switch between channels.
12
Contents