3. Connecting a computer to the KODAK DP850 ULTRA
The procedure for connecting a computer to the KODAK DP850 ULTRA is the same for all types of computers.
1.Make sure the computer, monitor and KODAK DP850 ULTRA are switched off.
2.Identify the RGB out connector on the back of your computer (where you connect a monitor to the computer).
3.Connect the computer to the KODAK DP850 ULTRA using the EVC cable and the adapter for the computer you are using. See figures 3 and 4.
4.If you have a desktop computer and want to display the image on your computer monitor, connect the cable from your monitor to the adapter.
See figure 5 and 6.
6
5.If you want to use the remote control to control your computer, connect the correct mouse cable from the computer to the adapter box. See figures 7 and 8. When your computer is connected to the KODAK DP850 ULTRA with the EVC cable (with EVC con- nector on the computer), the remote mouse control will automatically function as a regular mouse on your PC or MAC.
6.If you want to use sound with your computer, connect the stereo jack cable to the computer audio connection and to the PC or MAC adapter box.
7.Turn on the KODAK DP850 ULTRA and then the computer. The computer image should now be projected from the KODAK DP850 ULTRA and the remote control should now work as a regular mouse. If the computer’s image is not displayed simultaneously on the monitor, or the mouse is not working, see the section ‘What do I do if’.
Contents