TechniSat DigiPal1 manual Please read this first, Disposal instructions, Disconnecting the unit

Models: DigiPal1

1 38
Download 38 pages 19.87 Kb
Page 6
Image 6

3 Please read this first

>Before you start operating the receiver, please check that all necessary parts have been delivered.

You should have the following:

1 receiver, 1 mains plug/adapter, 1 remote control, 1 operating manual, 1 guarantee card, 2 batteries (1,5V micro-cells).

>Insert the batteries supplied in the battery compart- ment of the remote control unit, taking care to observe the indicated polarity.

>Before connecting the receiver, please first read the safety precautions in Chapter 3.

>Chapters 4 and 5 describe connecting the receiver, and adjusting it to the antenna and the television set.

>Chapter 6 describes all the functions required for everyday use, such as programme selection or volume adjustment.

>In Chapter 7 you will find information on how to add new programmes, or how to change the order of programmes in the list.

>Technical terms used in the operating manual are explained in Chapter 8.

>Technical data may be found in Chapter 9.

>A trouble-shooting guide to help you find and correct faults can be found in Chapter 10.

Disposal instructions

The packaging materials used for this unit consist entirely of recyclable materials. Please ensure that they are disposed of appropiately, e.g. via the “Dual System” in Germany.

Please note that spent batteries such as those used in the remote control, as well as any electronic parts, should not be disposed of in your regular domestic refuse. They should be disposed of separately, either via your ratailer, or through the local authorities.

Disconnecting the unit

The unit should be disconnected from the mains power supply during electrical storms, or when the unit is not in use for an extended period of time.

6

Page 6
Image 6
TechniSat DigiPal1 manual Please read this first, Disposal instructions, Disconnecting the unit