TechniSat DigiPal1 manual Sorting programmes, Blocking access to programmes Parental Control

Models: DigiPal1

1 38
Download 38 pages 19.87 Kb
Page 27
Image 27

>Press the red function key (Delete).

The message “Do you really want to delete the programme(s)?” will be displayed.

>Use the arrow keys left/right to select Yes or No.

>Confirm by pressing OK.

7.1.4 Sorting programmes

To sort the programmes in your Favorites list in the order most convenient to you, proceed as follows:

>Press the OK key to call up the Favourites list.

>Press the blue function key (Change).

>Now use the arrow keys up/down to select the programme you wish to place at a different position in the list.

>Now press the yellow function key to select the function Sort. A double arrow will be displayed next to the selected programme.

>You can now use either the arrow keys up/down or the numeric keypad to move the programme to any position in the programme list.

>Press the yellow function key (Store) to store the new position of the programme in memory.

In order to select a number of programmes simultaneously, proceed as follows:

>Press the OK key to go to the Select mode.

The selected programme will now be indicated by a cross in the left margin.

>You can now proceed to select additional programmes, using the arrow keys up/down.

>When you have completed selecting the programmes you wish to, press the yellow function key (Sort).

>You can now move the selected programmes to any position in the programme list, using either the arrow keys up/down or the numeric keypad.

>Press the yellow function key (Store) to store the programme(s) at the new position.

>When you have completed configuring the programme list according to your own preference in this manner, press the Back key twice to return to normal operation.

7.1.5Blocking access to programmes (Parental Control)

You have the facility to block access to programmes. A blocked programme will only be displayed on screen once the programme has been selected, after which the PIN code must be entered. Once this code has been entered, the restriction remains de-activated until the receiver is switched off (Standby).

27

Page 27
Image 27
TechniSat DigiPal1 manual Sorting programmes, Blocking access to programmes Parental Control