TechniSat DigiPal1 manual Installation, OSD Language, Basic settings

(Fig. 5-1)

(Fig. 5-2)

(Fig. 5-3)

5 Installation

Now that you have connected your receiver, and commenced operation, you can turn to optimising the setting for your personal preferences.

5.1 OSD Language

This menu item gives you the option of selecting the menu language of your choice.

In order to change the OSD language, proceed as follows:

>Press the Menu key to call up the Main Menu. (Fig. 5-1)

>Use the keys arrow keys up/down to select the menu line OSD Language.

>Confirm by pressing OK.

The sub-menu OSD Language will be displayed.

>Use the arrow keys up/down to select the desired language.

>Store the selection in memory by pressing OK.

>Press the Back key to return to the Main Menu.

5.2 Basic settings

In order to operate your DVB receiver as conveniently as possible, you should make some adjustments to accommodate your personal preferences.

>Press the Menu key to call up the Main Menu.

>Use the arrow keys up/down to select the line

Settings.

>Confirm by pressing OK.

The menu Settings will be displayed (Fig. 5-2)

>Use the arrow keys up/down to select the line

Basic Settings.

>Confirm by pressing OK.

The menu Basic Settings will be displayed(Fig. 5- 3).

>Use the arrow keys up/down to move around within the menu, and to change the individual positions as indicated. When selecting a menu item please also note notices displayed on screen, where applicable.

The following settings can be made:

14