Your receiver will now check automatically whether the channel you have selected, as well as the lower neig- hbouring channel adjoining it, are free (Fig.
>When you have found the optimum UHF channel, please remember to store this in your TV set memory. You can now make further adjustments in the menu
Audio/Video Settings,or you can press the Menu key to return to normal operation. This setting will be automatically stored when you exit the menu.
>If your television set is equipped only with an automa- tic search function, then simply set any UHF channel on your receiver, then start the automatic search pro- cedure of your television set. If necessary, keep repeating this procedure until you have found a suita- ble output channel, then store this in your TV set memory.
>At this stage it may be necessary to
4.5 Adjusting the antenna
Your receiver is equipped with a signal strength indicator to facilitate the optimum adjustment of the antenna.
>Press the Menu key to call up the Main Menu.
>Now use the arrow keys up/down to select the menu line Settings.
>Confirm by pressing OK.
The
>Now use the arrow keys up/down to select the menu line Antenna adjustment.
>Confirm by pressing OK. The menu Antenna adjustment will be displayed (Fig.
>Now use the arrow keys left/right to select the channel with the weakest reception signal strength.
>Now adjust the position of the antenna until both bar
indicators show optimum signal strength.
red bar | poor reception |
yellow bar | good reception |
green bar | very good reception |
4.6 Serial interface RS 232
The RS 232 interface serves to carry out updates of the ope- rating software, as well as to facilitate
(Fig.
(Fig.
(Fig.
90
70
(Fig.
13
