TechniSat DigiPal1 manual Cancelling parental control for individual programmes, Programme search

7.3Cancelling parental control for individual programmes

In order to delete the parental control block for individual pro- grammes, proceed as per Point 7.1.5. First press the blue function key (Change), then enter the PIN code. Select the appropriate programme and use the green function key (Parental Control) to remove the access control.

7.4 Programme search

There are various methods of proceeding with a programme search, which will allow you to receive new programmes.

1. Automatic Search/Scan:

Select this type of search in order to scan the entire frequen- cy range of the receiver for programmes.

2. Extended Search:

Select this type of search to scan only a specific range of fre- quencies or channels for programmes.

3. Manual Search

Select this type of search to scan a specific frequency for programmes.

When the search has been completed, your screen will dis- play a message showing how many programmes have been found by your receiver, and how many of these are new. New programmes are stored in the Total list and can be added to the Favourites list as per Point 7.1.

>To perform a programme search first call up the Main Menu. (Fig. 7-5)

>Use the arrow keys up/down dto highlight the line

Search.

>Confirm by pressing OK. The sub-menu Search will be displayed (Fig. 7-6)

>Now use the arrow keys up/down to select the type of search method you wish to perform.

7.4.1 Automatic Search

>A message will be displayed, confirm this by pressing OK. The entire input frequency range will now be scanned for programmes. Please note any further messages that are displayed on screen.

It may take more than 15 minutes to complete the search.

>You can terminate the search by pressing the red function key.

(Fig. 7-5)

(Fig. 7-6)

29