Kodak CX7220 manual Message Cause Solution

		Troubleshooting
Picture quality problems
If...	Try one or more of the following
The picture is too dark	■ Use Fill flash (page 12) or change your position so light is
or underexposed	not behind the subject.
	■ Move so that the distance between you and the subject is
	within the effective flash range (see page 12).
	■ To automatically set exposure and focus, press the Shutter
	button halfway and hold. When the ready light glows
	green, press the Shutter button the rest of the way
	down to take the picture.
	■ Increase Exposure Compensation (page 14) and try again.
The picture is too light	■ Turn flash off (page 12).
	■ Move so that the distance between you and the subject is
	within the effective flash range (see page 12).
	■ To automatically set exposure and focus, press the Shutter
	button halfway and hold. When the ready light glows
	green, press the Shutter button the rest of the way
	down to take the picture.
	■ Decrease Exposure Compensation (page 14) and try
	again.
The picture is not clear	■ To automatically set exposure and focus, press the Shutter
	button halfway and hold. When the ready light glows
	green, press the Shutter button the rest of the way
	down to take the picture.
	■ Make sure camera is not in Close-up mode if you are more
	than 23.6 in (60 cm) from your subject.
	■ Place the camera on a flat, steady surface or use a tripod.
	■ Clean the lens (page 44).
Camera screen messages
Message	Cause	Solution
No images to display	There are no pictures in	Change image storage location
	the current image storage	setting (page 15).
	location.
Memory card requires	Card is corrupted or	Insert a new card (page 7) or
formatting	formatted for another	format the card (page 19).
	digital camera.	Caution: Formatting a card
Memory card cannot
be read (Please format		deletes all pictures and videos,
memory card or insert		including protected files.
another card)
		36