Kodak CX7220 manual Camera ready light status, Status Cause/solution

Troubleshooting

Camera ready light status

Ready light

Status	Cause/solution
Ready light glows	Camera is on; ready to take a picture or video.
steady green.
	Shutter button is pressed halfway down. Focus and exposure
	are set.
Ready light blinks	Picture is being processed and saved to the camera.
green.
	Pictures are being transferred to computer, camera is
	connected.
	Camera firmware upgrade is in process.
Ready light blinks	Flash is not charged. Wait. Resume picture taking when the
amber.	light stops blinking and glows steady green.
	Auto exposure or auto focus are not locked. Release the
	Shutter button and recompose the picture.
Ready light glows	Camera’s internal memory or card is full.
steady red.	Transfer pictures to the computer (page 32), delete pictures
	from the camera (page 21), switch storage locations
	(page 15), or insert a card with available memory (page 7).
	Camera is processing. Wait. Resume picture taking when the
	light turns green.
	Card is read-only. Change storage location to internal memory
	(page 15), or use a different card.
	Camera DRAM is full and video recording is stopped.
	Recording resumes using internal memory or SD/MMC card.
Ready light blinks red	Insert new batteries. If using rechargeable batteries, charge
and camera turns off.	before inserting (page 2 and page 3).

Still having problems?

Visit www.kodak.com/go/cx7220support, or see Chapter 8, Getting help.

39