Control panel light message (continued)
Light status | State of the printer |
| Out of memory |
| The printer is out of memory. |
Action
The page you are printing might be too complex for the printer's memory capacity. Try lowering the resolution. See Understanding print quality settings for more information.
Attention: door open, media out, no print cartridge, or media jam
This printer is in an error state that requires operator intervention.
Printer initialization
A printer initialization is taking place.
Fatal error
All lights are on.
All lights are off.
Return to Finding the solution.
Check the following:
●The print cartridge door is completely closed.
●Media is loaded. See Loading media into the input trays for instructions.
●The print cartridge is correctly installed in the printer. See Changing the print cartridge for instructions.
●There is no media jam. See Clearing jams for instructions.
No action is necessary.
Unplug the printer for
30 minutes, and then plug the printer back in power outlet.
If the printer still has an error, contact HP Support. See Contact HP support.
Make sure that there is power.
Unplug both ends of the power cord, and then plug the power cord back into the printer and the power outlet.
ENWW | Status light patterns 67 |
