Chapter 2
Turning Off the Orientation Sensor
If you turn the camera when you take a picture (for example, to take a lengthwise or portrait, shot), the Orientation Sensor repositions the picture so it is displayed correct side up during Quickview, Review, picture transfer, and in
The Orientation Sensor is turned on as the factory default. You can turn it off so that pictures are displayed in the same orientation as they are taken.
1In Capture mode, press the Menu button.
2Highlight Orientation 
, then press the Select button.
3Highlight Off, then press the Select button.
4Press the Menu button to turn off the menu. This setting remains until you change it.
24