Chapter 3
Turning On Loop
When you turn on Loop, the slide show is continuously repeated.
1On the Slide Show menu, press 
to scroll down to Loop; highlight Loop, then press the Select button.
2Highlight On, then press the Select button.
The loop slide show begins immediately. It repeats continuously until you cancel it by pressing the Select button or until battery power is exhausted.
Loop reverts to Off when the loop slide show stops.
Displaying Pictures on a Television
You can run a slide show or display your pictures on a television, computer monitor, or digital projector (any device equipped with a video input).
NOTE: Ensure that the Video Out setting is correctly set to NTSC or PAL (see page 40).
Video out port
1Connect the video cable from the video out port on the camera to the video in port on the television. (Refer to your television User’s Guide for details on video in setup.)
The camera LCD turns off; the television screen acts as the camera display.
2You can now use the television screen to review your pictures in single or multiple views, run a slide show, or do anything on the television screen that you can do on the camera LCD.
30