Kodak CX4230 manual Card is protected Switch on card is

Chapter 9

LCD Messages

Message	Cause	Solution
Card is protected	Switch on card is in	Reset the switch as shown
(Reset switch on card)	write-protect position.	on LCD.
Card is locked	The card in the camera	To take a picture, insert a
	is write-protected.	new card or change storage
		location to internal
		memory (page 10).
Date/Time entry screen	This is the first time you	Reset the clock (page 7).
appears automatically	turned on the camera;
	or the batteries have
	been removed for an
	extended period of
	time; or the batteries
	are exhausted.
High camera	The internal	Leave the camera off for
temperature. (Camera	temperature of the	several minutes, then turn
will be turned off.)	camera is too high for	it back on.
	the camera to operate.	If the message reappears,
	The viewfinder light
		repeat the sequence above
	glows red and the	until the message does not
	camera will turn off in
		appear.
	five seconds.
Memory Card is full	There is no more space	Delete pictures from the
	on the card in the	card (page 28), insert a
	camera.	new card, or change
		storage location to internal
		memory (page 10).

67