Kodak DC25 manual Taking Pictures

Taking Pictures

OFF AUTO FILL
STANDARD HIGH	ERASE	POWER	1 Press the POWER button to turn the
	KODAK DC25 DIGITAL CAMERA
			DC25 on.
	Power		The green Power light turns on
			indicating the DC25 is ready to take
	Busy
	Memory		pictures.

						☞ If the camera is set to standard
						resolution, the lights will go
						through a series of blinks before
						the Power light stays on.
Subject range 2 to 3 ft. (0.5 to 1 m)						2 Position the subject in the
						viewfinder.
						Center your subject in the
						viewfinder:
						✔ Use the viewfinder’s inside line
						when your subject is 2 to 3 ft.
						(0.5 to 1 m) away.
						✔ Use the entire viewfinder area
						when your subject is more than
Subject range 3 ft.		(1 m) to infinity
						3 ft. (1 m) away.
OFF AUTO FILL						3 Firmly press the Shutter button.
STANDARD HIGH			ERASE		POWER
	KODAK DC25 DIGITAL CAMERA
				Power		The orange Busy light stays on for
						approximately 5 seconds as the
				Busy

Memory	DC25 processes the picture. You do
	not need to hold the camera still
	while the Busy light is lit but you
	will not be able to take another
	picture until the Busy light turns off.

☞The red Memory light remains off until the DC25’s memory is full.

2

Using Camera

2-3