Memory Full
When the DC25 and/or optional Picture Card are full you must erase the existing pictures to capture additional pictures. To save pictures, transfer them to your computer before erasing them.
You may also check the available memory left in the DC25 or Picture Card from the STATUS display on the LCD. See the LCD section in this chapter entitled Checking Camera Status for instructions on accessing the STATUS display.
Memory Light
Power
Busy
Memory
The red Memory light comes on when the DC25’s and/or optional Picture Card’s memory is full. You cannot take additional pictures.
☞If the optional Picture Card is full, the red Memory light comes on and you will not be able to take any more pictures. Remove the Picture Card and, if the camera memory is not full, you can take additional pictures.
Memory Full Display
| The LCD displays a message similar to the one on |
| |
| the left if it is turned on when the DC25 and/or |
MEMORY FULL | optional Picture Card becomes full. |
| |
|
|
2