Kodak manual Using DC25 with Your Computer, Connecting the DC25 to Your Computer

Using DC25 with Your Computer

Connecting the DC25 to Your Computer

☞The camera and the PC should be turned off before connecting the serial cable.

1 Plug one end of the serial cable into the printer or a COM port on the back of your computer.

☞If your computer has a 25-pin port, you need to purchase a 9-pin adapter and attach it to the port before attaching the serial cable to the computer.

DIGITAL	DC25	KODAK			2 Lift the rubber tab on the camera.
				HIGH	STANDARD
		FILL	AUTO
				OFF
DC25					3 Plug the other end of the serial cable into the
	CAMERA				camera’s serial port.

4Turn on the camera.

You are now ready to transfer the pictures from the camera to your computer using any one of the software packages.

Refer to the appropriate chapters of this user’s guide or the software’s quick reference guides for more information on the software packages.

3

Computer Setup

3-1