Kodak P712 manual Changing Pasm or C1, C2, C3 mode settings, Use the Command dial and Set button

Doing more with your camera

Changing PASM or C1, C2, C3 mode settings

PASM and C modes control the f-number (aperture), shutter speed, exposure compensation, and flash compensation.

PASM & C mode options

White—selectable Blue—non-selectable Yellow—changeable value Red—out-of-range

1Turn the Mode dial to P, A, S, M, or C1, C2, C3.

2Use the Command dial and Set button:

■Turn the Command dial to move the selection arrow between the available settings.

NOTE: For C1, C2, or C3, choose custom

exposure setting (PASM) in the Menu, see page 50.

■Press the Set button to open a setting.

■Turn the Command dial to adjust the setting, then press Set to close.

3Press the Menu button to change other settings (see page 42).

4Take a picture.

Using exposure compensation with exposure bracketing

In PASM modes, you can use exposure compensation in conjunction with exposure bracketing.

If the exposure	And if the exposure bracketing	Then the exposures
compensation is	interval is set to 3 steps:	taken are:
set to:
0.0	Set the drive mode to Exposure	–0.3, 0.0, +0.3
+1.0	bracketing 3 (see page 30)	+0.7, +1.0, +1.3
–1.0		–1.3, –1.0, –0.7

www.kodak.com/go/support 38