Kodak P712 manual Kodak EasyShare printer dock-powers your camera, makes

Appendix

Visit www.kodak.com/go/p712accessories for:

Kodak EasyShare camera dock—powers your camera, transfers pictures to your computer, and charges the included Kodak Li-Ion rechargeable battery.

Kodak EasyShare printer dock—powers your camera, makes

4 x 6 in. (10 x 15 cm) prints with or without a computer, transfers pictures, and charges the included Kodak Li-Ion rechargeable battery.

Kodak 5-volt AC adapter—powers your camera.

IMPORTANT: Do not use the AC adapter included with the Kodak EasyShare printer dock to power your camera.

Upgrading your software and firmware

Download the latest versions of the software included on the Kodak EasyShare software CD and the camera firmware (the software that runs on the camera). See www.kodak.com/go/p712downloads.

Additional care and maintenance

■If the camera has been subjected to inclement weather or you suspect water has gotten inside the camera, turn off the camera and remove the batteries and card. Allow all components to air-dry for at least 24 hours before using the camera again.

■Blow gently on the lens or camera screen to remove dust and dirt. Wipe gently with a soft, lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions unless designed specifically for camera lenses. Do not allow chemicals, such as suntan lotion, to contact painted surfaces.

■Service agreements may be available in your country. Contact a dealer of Kodak products for more information.

■For digital camera disposal or recycling information, contact your local authorities. In the US, visit the Electronics Industry Alliance Web site at www.eiae.org or the Kodak Web site at www.kodak.com/go/p712support.

89 www.kodak.com/go/support