Kodak P712 manual Using exposure metering, Icon Exposure metering options, General picture taking

Doing more with your camera

Using exposure metering

Choose a metering system in PASM or C modes for the appropriate lighting of your subject.

1	Press Exposure metering.
	(Press again to exit.)
2	to highlight an option.
3	Press OK or Set.

The active icon, except for the default mode, is displayed in the EVF/LCD screen.

NOTE: For rapid setting changes, see page 40.

Icon	Exposure metering options
	Multi-Pattern(default)—evaluates the lighting conditions at various
	points throughout the image to give an optimum picture exposure. Ideal for
	general picture taking.
	Center-Weighted—evaluates the brightness over a wide area with
	emphasis on the center of the screen.
	Center-Spot—similar to Center-weighted, except the metering is
	concentrated on a smaller area of the subject centered in the viewfinder. Ideal
	when you need an exact exposure of a specific area in the picture.
	Selectable Zone—creates an exposure-metering setting from 1 of 25
	selected screen locations. If used with Selectable Focus Zone (see page 51)
	they track together. Use	to move the cross-hair graphic to the
	desired zone.

39 www.kodak.com/go/support