Kodak M873 manual Direct printing PictBridge enabled printer problems, Turn the flash off see

Troubleshooting

Status	Solution
Picture is too light	■ Reposition the camera to reduce the amount of available light.
	■ Turn the flash off (see page 9).
	■ Move so that the distance between you and the subject is within the
	effective flash range. (See camera specifications starting on
	page 55.)
	■ To automatically set exposure and focus, press the Shutter button
	halfway. When the framing marks turn green, press the Shutter
	button completely down to take the picture.
	■ In Auto and SCN-Custom modes, adjust the Exposure Compensation
	(see page 27).
Direct printing (PictBridge enabled printer) problems
Status	Solution
Cannot find the	■ In Review, ensure “View By” is set to All (see page 23).
desired picture	■ Use the Direct print menu to change the image storage location.
The Direct print menu	■ Press any camera button to redisplay the menu.
interface turns off
Cannot print pictures	■ Make sure there is a connection between the camera and the
	printer (see page 46).
	■ Make sure the printer and the camera have power.
Camera or printer	■ Follow the prompts to resolve the issue.
display an error
message

52 www.kodak.com/go/support